Jump to content

Chromemagnum

Members
  • Posts

    56
  • Joined

  • Last visited

Profile Information

  • Home Port
    Port Ontario
  • Boat Name
    The Rusty Nail

Chromemagnum's Achievements

0

Reputation

  1. I have two sets of rod holders for sale for a total of four rod holders Will not separate . Aluminum mounting plates included . Asking 175.00
  2. I have fished out of this boat several times, it's a fishing machine! Its like new and the owner takes extremely well care of it. [ Post made via iPhone ]
  3. Anyone interested in two sets of of big Jon rod holders mounted on plates to go under your riggers or off the side for dipsy divers? Give me your email I will send you picks. [ Post made via iPhone ]
  4. I have a pair of cannon riggers I would like to wire up, the current connections are a male female plug that came wired to the riggers, my question is .... Will the flush mount wireing acessorie from cannon take the male and female connection from the rigger, I assume it will? But in the pictures of the flush mount connection the yellow receptor looks like it takes two males not one of each? Or do I Just cut the conectors off wire in a inline fuse and connect directly of battery?
  5. I have 16' outriggers on my boat and yes you can run dipsys no problems I use black realeses on the outriggers and rubber band like you mentioned [ Post made via iPhone ]
  6. Poke , just finished them the pin is a friction fit ... I got that out the bolt was tuff but I screwed a nut on it and hit it out with a ball peen hammer they are not threaded, they just are friction fit they will not turn the only wAy out is to knock them out . I need a few more holders if you know anyone who has any [ Post made via iPhone ]
  7. I have big job rod holders ( the ones that you pull the spring loaded pin to adjust ) I need to separate the wheel with the holes in it from the aluminum base to get access to the bolt that comes through the bottom of the base... I need to remove it and put longer bolts through the base? The pin that holds it together looks like a friction fit pin( like they uses to hold guns together) just wanted to know if anyone else has had one apart before I start beating on it with a center punch? Thanks in advance! [ Post made via iPhone ]
  8. Goose numbers seem to be up, but how come ducks are on the down fall?
  9. Will you separate rod holders from the swivel bases ? I am in Pulaski [ Post made via iPhone ]
  10. I launched there Saturday my boat is 30' the only down fall of the ramp is that it is gravel and a huge divet is in the ramp which makes your trail axel uneven making centering your boat on the trailer difficult. [ Post made via iPhone ]
  11. hi curro, I recognize your name from another fishing sight, you will like lake Ontario united ! There is alot of seasoned Guys on this board willing to help !
×
×
  • Create New...