Jump to content

Chromemagnum

Members
  • Posts

    56
  • Joined

  • Last visited

Everything posted by Chromemagnum

  1. I have two sets of rod holders for sale for a total of four rod holders Will not separate . Aluminum mounting plates included . Asking 175.00
  2. I have fished out of this boat several times, it's a fishing machine! Its like new and the owner takes extremely well care of it. [ Post made via iPhone ]
  3. Anyone interested in two sets of of big Jon rod holders mounted on plates to go under your riggers or off the side for dipsy divers? Give me your email I will send you picks. [ Post made via iPhone ]
  4. I have a pair of cannon riggers I would like to wire up, the current connections are a male female plug that came wired to the riggers, my question is .... Will the flush mount wireing acessorie from cannon take the male and female connection from the rigger, I assume it will? But in the pictures of the flush mount connection the yellow receptor looks like it takes two males not one of each? Or do I Just cut the conectors off wire in a inline fuse and connect directly of battery?
  5. I have 16' outriggers on my boat and yes you can run dipsys no problems I use black realeses on the outriggers and rubber band like you mentioned [ Post made via iPhone ]
  6. Poke , just finished them the pin is a friction fit ... I got that out the bolt was tuff but I screwed a nut on it and hit it out with a ball peen hammer they are not threaded, they just are friction fit they will not turn the only wAy out is to knock them out . I need a few more holders if you know anyone who has any [ Post made via iPhone ]
  7. I have big job rod holders ( the ones that you pull the spring loaded pin to adjust ) I need to separate the wheel with the holes in it from the aluminum base to get access to the bolt that comes through the bottom of the base... I need to remove it and put longer bolts through the base? The pin that holds it together looks like a friction fit pin( like they uses to hold guns together) just wanted to know if anyone else has had one apart before I start beating on it with a center punch? Thanks in advance! [ Post made via iPhone ]
  8. Goose numbers seem to be up, but how come ducks are on the down fall?
  9. Will you separate rod holders from the swivel bases ? I am in Pulaski [ Post made via iPhone ]
  10. I launched there Saturday my boat is 30' the only down fall of the ramp is that it is gravel and a huge divet is in the ramp which makes your trail axel uneven making centering your boat on the trailer difficult. [ Post made via iPhone ]
  11. hi curro, I recognize your name from another fishing sight, you will like lake Ontario united ! There is alot of seasoned Guys on this board willing to help !
  12. mark I was thinking about heat shrinking tubing every 100' on the 600 spools then using a rubber band looped on my black release,for adjustability ? Thoughts? [ Post made via iPhone ]
  13. Mark , will the outriggers with copper clear the dipsey with no issues?
  14. Thanks guys , I think I will go with two new coppers off the outriggers Tom
  15. Nice boat! What make is it? [ Post made via iPhone ]
  16. For late June and July I am Planning on running two riggers, two wire divers ... What's your guys opinion about were I should put another two rods I was thinking two copper Riggs off the outriggers? 0r should i run two more rods off the riggers?What in everyones opinions would be the most productive. [ Post made via iPhone ]
  17. A 223 will work fine I have seen that cartridge blow threw a shoulder and out the other side of a white tail ,at 100 yards, what the bullet lacks in grains it makes up for in speed.
  18. Looking for rod holders double or triple sets would be nice, big john .....etc..pm me thanks
  19. Hi I will take the pair of cannons email me at [email protected] Thanks [ Post made via iPhone ]
×
×
  • Create New...