Jump to content

Tradman

Professional
 View Profile  See their activity

  • Posts

    346

  • Joined

  • Last visited

 Content Type 

Everything posted by Tradman

  1. Tradman
    its about time you got a real boat with no trash hanging off and going through the transom lol
  2. Tradman
    http://www.armstrongnautical.com/brackets.htm
  3. Tradman
    Wanted to add down temp and speed, is a unit called a depth raider drx 10 worth a rats ass or should I pony up for a fish hawk, most of my fishing is on Lake Erie, probably wont use it there , I normally make about 5 or trips a year to your pond
  4. Tradman
    ttt
  5. Tradman
    Looking for a new, used or abused 17r18, bronze or nibral prop with a 1.25 " bore
  6. Tradman
    Just personal preference, I like to keep the transom area free of all I can, so my vote is no
  7. Tradman
    11 about 111 inches
  8. Tradman
    Been trying to find out about LEGALLY towing my 26 PY up to your pond a few times this summer and fall, I'm about screen blind from reading all the crap from the NY dept of trans, my question is, has anyone here from the forum ever gone thru all the steps and done it right, and if so maybe you can point me in the right direction or to someone who handles this kind of thing. Ive never had a problem in years past with no permit, but Id like to be legal if its not too big a pain in the ass
  9. Tradman
    Is the pump included with this unit
  10. Tradman
    Did you wiggle the shift lever while holding key in start position, a bad linkage adjustment or bad neutral safety switch is always a possibility
  11. Tradman
    Boat is going in next week will post pics then, ill check and see if there are any more on my computer Also replaced fuel pump this spring with a new unit that is compatible with Ethanol as are all the fuel lines and carb, replaced wiper motor and installed pantograph wiper arm as well as the sending units in both tanks, replaced all trans and engine oil cooler hoses and rear main seal and installed a new damper plate. pulled motor and trans as I had a miniscule oil leak last fall, I had the rear main seal on hand, so it got replaced while motor was out, although that wasn't the source of the leak, found the metal plug that seals the cam bore had a small drip,replaced it too, I'm anal and probably have OCD too,But I hate half assed things this boat has had Impeccable maintainence,
  12. Tradman
    ttt
  13. Tradman
    you should be able to spin the tool with equal resistance all the way around no tight spots, if you cant do this if the alignment is off, also make sure your all the way in the coupler, coat the tool with grease to see haw far your into the coupler, should go all the way to the shoulder, also make sure your not binding on the shift connection
  14. Tradman
    you should use an alignment bar and set alignment before ever trying to reinstall outdrive, I have one you can use if you pay for shpping, hell you can have it as all my boats are now straight IB
  15. Tradman
    windlass has a new home
  16. Tradman
    Windlass for sale or trade $400 OBO Used SL horizon 600 horizontal windlass, just had motor rebuilt before replacing with a vertical unit, works great, just no need for it . includes a new, never used Simpson Lawrence reversing contactor, gears and all other inside components absolutely rust free and undamaged. Also have a used 250 foot anchor rode, 235 feet of 1/2 inch rope with 15 foot of chain professionally spliced, $65 for the rode separately or $40 with the windlass, this windlass is rated for up to about 32 feet of boat. pic is of stock unit, will try to post pics of actual unit when time permits Will also trade fore Quality wire diver rod and reels, no Okuma Magdas, Convectors or better
  17. Tradman
    Still for sale, prefer calls over texts if interested, 724/97seven-3four9seven
  18. Tradman
    Im about 35 miles S of Erie PA, If your serious about buying, Id meet you halfway, maybe Barcelona or Westfield
  19. Tradman
    This was the predecessor to the current MA models, but lay them side by side and You wont see any difference, built in the early 80s, a good bit quieter than my current MA and about 8 FPS faster than my new one which is 84 lb @28 inches, shooting the same arrows
  20. Tradman
    Black Widow takedown, this is the same model as the newer MA 2 takedowns ,Right Hand, 72 lb draw @ 28 inches, 60 " AMO, includes 2 new Dacron Flemish strings, this model is not fast flight string compatible, great condition, absolutely no limb twist, a few very small defects in the epoxy coating on limbs, $300 to your door
  21. Tradman
    Also will sell w/o trailer and adjust price , trailer can be used to move boat for potential buyer
  22. Tradman
    Id like lots 1 and 6 Ill PM for payment and shipping thanx
  23. Tradman
    Will you ship any of the spoon lots at buyers expense, Im just a little too far away
  24. Tradman
    Just wanted to add, you don't have to buy Seastar fluid, Way overpriced, Meyer snowplow fluid meets the same MIL spec as Seastar and is way cheaper
  25. Tradman
    PM sent
×
×
  • Create New...