Jump to content

Sarge5150

Members
  • Posts

    41
  • Joined

  • Last visited

Everything posted by Sarge5150

  1. He everyone I am looking at making a trip to the big lake for Browns this spring. I am looking at last week of April first week of May in the Pulaski area. Given the current conditions out there now does that seem reasonable? Not looking for crystal ball predictions just trying to harness the hive mind. I am also looking for suggestions for lodging. Not looking for anything fancy just 2 beds and the ability to cook some food. I appreciate any advice! Thanks!
  2. I have many questions lol. Do you only use the troller when you are rigging? How many volt system? Does it last for a full day fishing? What kind of boat are you running it on? Thrust rating? Thanks for the info.
  3. I have a 18' Smokercraft Phantom. It is all aluminum with a 90 Honda on it. The issue I am having is keeping the bow into the wind. If the wind is pushing 10 or above it is a b!tch to fish out of alone. In the time it takes to put a rigger down it can just about do a 180. I have tried drift bags and they helped a little but they require me to troll above idle and there is that typical flat spot in the throttle. I was thinking about adding a trolling motor to the bow but not sure it would do the trick (and it would be an expensive test). Anyone have any ideas for simple things I could try? Thanks.
  4. We are looking to travel out and fish in Mexico the first week of June. Based on the bite so far will the Brown fishing be down by then?
  5. I am still looking the Lowrance P/N is 000-10976-001 it should have a blue plug.
  6. Looking for a HDI transducer for a Lowrance. Mine got broken while the boat was in storage.......mysteriously.
  7. Can I get in line for 2 of the SG27LCAs? Is it 60 ea TTD?
  8. Title says it all pretty much. Not brand picky just looking for them to be in decent shape with or without line. Must be able ship. Thank you!
  9. I would do the mast for $150 if you will ship.
  10. Looking for a few 4.0 coyote spoons in army truck pattern. I cant seem to find them online with out paying stupid S&H.
  11. Ahh ok. I assume they will pull down to the bottom lure when you get a fish on?
  12. How are these rigged? Sent from my SM-N950U using Lake Ontario United mobile app
  13. Does this have a transducer? Edit: I cant read apparently.
  14. Do you still have any of these? Sent from my SM-N950U using Lake Ontario United mobile app
  15. What is everyone's go to for preserving bait fish? I bought some smelts from a retailer last year that were so well done that they were usable after sitting in the boat for 3 months.
  16. Yeah I was thinking that might be an issue. What receiver did you get? Is it weatherproof?
  17. So this year I was going to spring for the the navionics chip to go in my Humminbird. In my research I found that there is an app as well which got me to thinking. I could add a tablet and add the app and potentially get the same thing with the benefit of portability. Does anyone run this and how does it compare to the chip for the FF? Obviously with no sonar connection you cant get real time adjustment but otherwise is it essentially the same?
  18. Looking to buy a working hummingbird helix 5 or 7. Sent from my SM-N950U using Lake Ontario United mobile app
  19. I would believe it. I have a silver plated speedy shiner that out fishes the stainless equivalent 4:1.
  20. I wish they had an online presence. I need some 44s but living in Maine makes it a bit more than a day trip lol.
×
×
  • Create New...