Search the Community

This boat is mint!!!!!!!!!!!!! Won't last!!! Crestliner 1400 Angler Side Console with 40HP mercury with power trim and oil injection. Custom Trailer and cover, motorguide trolling motor and fishfinder. Asking $5295.00 North East Pennsylvania. Call Dave @ 570-241-6831 Don't PM me!!! I don't check my messages.

For Sale: 2002 Lund Baron Magnum 2150 2003 Yamaha 200hp 2-stroke 2003 Yamaha 8hp 4-stroke 2002 Eagle tandem trailer Lowrance LMS-332c GPS Lowrance X103c fishfinder rain canopy bow canopy full boat cover 6 seats, two rear seats fold down Many more extras ***Please note - pictured bow mount electric motor has been sold separately and NOT included*** I'm posting this boat for my fishing partner. He is asking $21,900. Boat is in excellent condition with low hours. For any further information, please call Gary at (315) 559-9659.

This is a Fishpond Shooting Star Chest / Backpack. Can be worn a simple chest pack with two choices of neck straps (long or short) and a waist strap or can be attached directly to the backpack which has several compartments, rod tube holders on the sides, rainfly in a zippered compartment, adjustable shoulder and waist straps and water bottle holders on the sides. It is used but in excellent condition. These sell for $190 and I'm asking $95. I prefer local pick up in West Seneca (near Buffalo) or can ship with buyer paying shipping. Mike

Selling 46 A-TOM-MIK Flies (many unopened) & 22 Spin Doctors as complete trolling package. Assorted colors and patterns, many of which are established fish producers on this blog. Asking $225 obo for all pieces. Will include carrying case and rigging. Please PM or call 562-480-0036.

I have a Raymarine Sportpilot 5X-R for sale. I have only had it on my boat for 2 years. Works great. This is a perfect autopilot for a single screw I/O or an outboard boat with cable steering. However I did have it installed on a twin screw inboard. I have everything you need to hook up and go. The only reason I am selling is I am installing hydraulic steering and a new autopilot on my boat. Comes with the control head and all the seatalk cables as well as the drive motor that mounts on the wheel. I have to get one last piece off the boat next weekend so it will be available then. I can meet you in Sodus Pt or anywhere around Syracuse or 81 south to Cortland. I really dont want to ship it. 1100.00 firm Send a PM if interested Thanks Brian

Looking to buy a 18 to19 foot deep-V aluminum boat . I/O or O/B . Lund ,Starcraft etc. Like to stay under 9k . Send me a pm. Thanks again

For sale is a nice R.H. Forschner (Victoronix) Cimeter 10 inch butcher knife with a rosewood handle (Model 403-10). This works great for steaking out your salmon, butchering deer or whatever your cutting needs are. These world famous swiss blades (Victoronix) are used by professionals around the world. $25 Call 585- 2 one 7 - 2 one 5 one.

I am selling four downrigger weight holders that I no longer need. They can be picked up in Brockport or Rochester. I can also accept Pay Pal and ship for additional cost. Thanks

Okuma Convector CV45L reel with a 30lb mono and a couple colors of leadcore. (on busted cooper rod, i wasnt very careful getting it into the car!) SOLD

MUST SELL to pay for new boat: 1992 Bayliner 2359 hard top trophy with 1992 escort bunk trailer. Great Lake Ontario fishing boat has a merc 4.3L and alpha one outdrive with approx 450hrs showing on hour meter. Has no fishing gear or down riggers. Has 2 planner mask with no reels. Has roof mounted rod holders and marine radio with brand new 8500 antenna, also has a Garmin GPS 421s. Blue Chart g2 micro SD card installed #VUS019R and a kicker motor mount. Also has a Thru-hull SS260 1 kW transducer with high speed fairing block wired for Lowrance. Which may be able to configure for other sonars. Also has a custom canvas cover for storing in the winter, so no need to shrink wrap. Text or call 315.447.4020 7am-7pm mon-sun. With any questions.or more pics. NO REASONABLE OFFER REFUSED! MUST SELL.

Fulton adjustable kicker motor mount. Came on my boat when i bought it but it was too small for my 4 stroke merc so i switched it out for a gaerlick. Handled my old 2 stoke 6hp perfectly. Im not sure the model # as its not on the mount anywhere. Best offer takes it, open to trades. Located in Syracuse, would ship if buyer picks up the tab for it.

For sale is a 1986 Johnson 9.9 2 stroke motor. The motor is a an electirc start with a 20" shaft. The motor is in great condition and runs great as well. It comes with an extra prop, a six gallon gas tank, charging wires, and the gas tank hoses. Check pictures attached to see motor condition. Motor is located in Medina, NY and asking $700. Contact Mike at [email protected] or by phone at (585) 798-2770.

CABELA'S Scotty's Flush Mount Quick Draw Fishing Rod Holders x 4 All are in great condition. Price is $48 shipped to your door in the USA (these are pretty heavy so shipping is going to cost me $12.00) Thanks, Mike

these were apparently to expensive for slowrollin and fshnwmn so i have removed them. tight lines.

SOLD PENDING PAYMENT Please read the update to this also as i'm convinced that it is the problem with this engine. Suzuki 75 hp outboard: This engine starts and runs beautifully and sounds crisp and strong on the stand, but the overheat buzzer went off when i had it on the boat and took it out on the water. this engine came on a boat i bought. the first time i took it out it buzzed and lost rpm's. i took it to a marine mechanic who told me the engine will cut rpm's if it thinks its overheating, to protect itself from damage. they checked the water pump and it was good, compression was very good, thermostat was ok, they put plugs in it, charged me $650.00 and sent me on my way. expecting it was fixed, i took it back out and it did the same thing. i called them back and they said they could try rebuilding the carbs. i was planning a trip to Lake Ontario with the boat so i decided to buy another engine instead of spending more time and money on this engine. it comes with controls, gauges, prop, etc. it has power tilt / trim. I honestly don't know what, if anything is wrong with this engine, it was my first one so maybe i was doing something wrong, I don't know. please take a look at the pictures, its running in the photo's, i'm not sure if the tach is acurate as that picture was taken just above idle so i would guess more like 800 or 1000 rpm's., I believe the engine is a 1988. this engine starts and runs but has an unknown issue, I do not beleive it actually overheats, it shows no signs of overheating, if you are mechanical at all this may be the deal you've been looking for. being sold as is. I may consider parting out at a later date if the engine does not sell. you are welcome to come and look at engine and see it run on the stand. thank you for your interest and good luck. asking $600.00 OBO this engine is also listed on e-bay On Apr-05-14 at 18:40:02 PDT, seller added the following information: I just received a phone call from a very knowledgeable individual and he told me what the problem with this engine most likely is. very simple, if you look at the last two photo's(I just added them ) . you can see a plug with a couple wires attached going into the head just below the top spark plug. this is a sort of temperature switch. they tend to go bad and stick, giving incorrect information, so to speak. in other words, its telling the engine to cut rpm's because it thinks its running hot. this is an easy fix. if i didn't already buy a replacement engine, i would probably go ahead and fix this engine, but being as the engine already has interested parties, it would not be fair of me to pull it off now. so i decided to pass this information along to try to give insight to everyone. i would like to thank John for this information. i very much appreciated the phone call. thank you !

New info 3/23/14 Humminbird 565 depthfinder goes with it, AM-FM stereo, 4 brand new tires to be mounted this week $300 value, worked on it to try to get it started, believe there is a solenoid issue as starter clicks off. believe bearings on trailer are all good, trailer lights work, ready to roll down the road. Price reduction to $1500 on 3/19/14 1979 Penn Yan 20 ft Tunnel Drive. Mercruiser V8 Inboard. Sitting on a 1990's roller shorelander trailer in good condition. This board sat since 09, I bought it in fall of 2011 as a project which I have not started and may never start so it is reluctantly for sale, but I need to pare down my inventory. Motor status is unknown, don't know if it fires or not, have not gotten beyond issue with key/starter. But straight inboards/tunnel drives are simple. Boat is in very good condition, couple chips near bow other than that in good shape. Penn Yan emblems on it etc. Windshield fine. Has a heavy wood swim platform and electric/hydraulic trim tabs. This boat has the Mercruiser V8 w/velvet drive, I have not determined the exact motor but Chevrolet V8's are listed on the Mercruiser chart for this year boat. I believe it has the 305-198 hp. Have registration for boat-registered to me, no registration on trailer needs to be registered as a homemade. Boat is all there, for someone looking for a Penn Yan to restore and drive around this summer or use as a fishing machine, this is your boat. Asking $1900.00 or reasonable offer. Late winter negotiable. Boat located in Dunkirk, NY Trailer is going to need tires which I may address once the weather breaks. Likewise I intend on tracking down issues which may prevent the motor from being fired up, line starter lines, battery cables, ignition etc.