Jump to content

F/S My 1988 Trophy 2160 HT Fishing Machine


ReelPower

Recommended Posts

Lifetime freshwater hardtop, great mechanical condition good exterior condition. Set up for great lakes trolling. GM 5.0 230 h.p. & OMC Cobra w/trim tabs. No hour meter but very well cared for by previous owner and myself. Runs great, trolls down to 1.9 m.p.h. w/trolling bags out. Cruises at 29 m.p.h. tops out at 35 m.p.h. Original cabin cushions are in very good shape. Full swim platform w/kicker mount and anchor pulpit. Dual seat, built-in tackle compartment, ice box and sink set-up. Sleeps three.

Outdrive serviced start of 2009 (seals, drain, fill), new zinc anodes start of 2009, tune-up start of 2009, two new marine batteries start of 2009, rub rail replaced/maintained 2009, electronic ignition conversion, new ESA switch and tune-up 2010, new trim tab lines and resevoir 2010, new rear LED transom lighting 2010, new aluminum seven rod rocket launcher 2010, new Bomar hatch 2010, new transducer 2010, new Powertech 15 x 15 stainless four blade prop 2010, new impeller & impeller housing 2010. I have all or most of these records.

Comes with Big Jon planer board reels and pulleys (2009) set up off the hardtop with 250' 500 lb. spectra planer board line, four Craig multi-directional aluminum rod holders, four Tite-Lock multi-direction rod holders, four standard flush mount rod holders, two net holders, two angled upright rod holders, Garmin 182 GPS w/ Erie/Ontario Blue Chart chip, Lowrance x510c 4000 watt color fishfinder (new transducer), head unit for Fish Hawk thermo troll (probe available), four Cannon low profile swivel downrigger mounts (two Cannon Mag 10 electric, two manual Cannon Uni-troll and two manual Easi-troll riggers available), Uniden VHF radio, cassette player/radio, cabin lighting, LED transom lighting, rocket launcher, fuel filter & spare filter, vapor-lock preventer, perko switch for the batteries, rear snap canvas, fluke anchor & 125' rope, porta-potti, spare three blade aluminum prop in good condition, dock lines, four life jackets, cooler off the swim platform, misc. parts/tools and the owners manuals for boat/engine/ outdrive/most accessories.

Also included in the sale is a 1988 Escort galvanized trailer in decent condition - good tires, frame, lights and brake actuator but the surge brakes need fluid and maintenance. I trailer the boat 2x a year over 250 miles each way without any problems so I haven't bothered with the brakes. New winch strap and trailer jack 2010.

All Ohio registrations current. Boat is docked or on trailer in Eastlake, Ohio depending on what I'm fishing for. Covered and serviced each winter. Boat hails from Michigan originally. I'm selling to get into the 27'-30' range due to expanding family. Boat includes dockage through the end of 2010. Its ready to roll.

$9,500

Contact Jarrett Northup at [email protected] or (216) 780-4266 for inquiries/pictures.

Link to comment
Share on other sites

New price and upgrade on the riggers:

$8,500 with the cannon Mag 10 electrics (2) and the cannon Unitroll manual riggers (2).

I forgot to mention the old Raymarine Sport Pilot autopilot on the boat. It works (as good as the old sport pilots can). Its control stick is busted but the unit powers right up and takes the wheel: it is set in the middle of "correction" range on the dial of the control stick.

Its handy for trolling when all hands are needed on deck or running point to point. It can be finicky for low-speed trolling and I usually don't turn it on. The boat trolls pretty damn straight just by itself with bags out. It is functional and can be useful when needed.

Link to comment
Share on other sites

I forgot to mention the sale also includes a set of 28' x 8" pine heavy duty planer boards stained flo. yellow. I upgraded to the Amish Outfitter composite boards and the one-year old pine boards stay with the rig. Not bad boards. I pulled a couple jet forties or three deep divers off 'em effectively.

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...