Hookedup

Hi Just checking to see if the guys you have fishing in the boat with you on the Big Fish Friday have to be the same crew that you will have on the Saturday and Sunday? Thanks Sean

You have been on it today. Study up Trolling 82 in a couple of weeks we will have my boat all tore apart.

Ok need some help from the pros. Anyone Have a Garmin GHP10 and if so how hard was it to install? What is involved with hooking into the hydraulic system on the boat? And where do I get the extra hydraulic hoses and fittings? Once I get this done I will probably need help hooking it to my GPS. Thanks Sean Brown

One day on the water not smelling gas fumes is worth what ever the 4 stroke kicker cost. Sean

Bob you and LB88 can jump on my boat in the next couple of weeks and I can help ya with some flasher and fly info. Bob how big was that Brown . I am going to have to get you out to show you how to use that truck full of gear you are going to get on the 28th. Sean

What is the beam length? and do you run the kicker off seperate tank?

Tom I need three more copper reels, should I just call you to set up pick up at the show. Sean

Luv2fish. Any day of the week it is above freezing go to Severne Launch off 14 and just look North for the army of boats. I check the launch all of the time while I am working, and I have not seen a day yet in the last two weeks when you wuldn't find boats out of Severne. Sean

Let me know what you have come up with and we will do it. Sean

I have had good luck with the Cabelas core.

Both of you guys will be going when I get it out! It is to cold to mess with it this week. The UPS truck is running up and down the drive a lot this week with all the new gear for the season. All I need is a couple good days to work on it and then up to Seneca for a test run. Ioiosowork when is that new Tracker going to be parked in your drive? We got lots of holes to drill in it

Trolling 82 we might have to put my boat together in the next couple of weeks. Sean

when you guys going out again? This is the time of the year to get the salmon out on Seneca you wont get those numbers in a couple of months on Salmon. We used to get them like that in the fall but it looks like this is the time of year to do it. Sean

Small Browns have tails like that. They are Browns. Nice job on all the fish.

Need some info from Big Jon Planer mast owners. I have the dual reel manual planer mast, and I am looking at the dual reel electric planer mast. Does the Electric mast use the same base plate as the manual? And can you take the electric mast off or is it mounted permanently to its base plate? I looked at and liked the Cisco system but it was a permanent mount and I want to be able to remove the mast when I am not using it. Also for any of you guys that are running the Big Jon electric mast what do you use for quick disconnects for the wiring at the mast so you can take it off? (That is if it can be removed) Thanks for the help.

I have some to field test from Seneca Marine I am going to start in March I will let you guys know what happens. I think will run one side of the boat with them. Sean

Anyone recomend a good site to order some Okuma Clarion reels I need 45s and 55s. I placed an order with one company after two weeks no reels, I called them they said order was cancelled no product in stock. Nice of them to let me know.

First drop the riggerball down while you are not moving if you dont see it then you got problems. Then if you do tilt your trasducer back slightly you should pick it up. Might be a transducer problem I pick up the rigger balls, the sliders, and the probe.

Bob let me know if you can do the meeting on th 11th. I am going to go you can keep me awake im doing ot wed night. Need the fishing money

Trolling82, Just stop over some day I have 8 copper rigs, I will show you the set up. I run mine like core a 200' and 300' are great for running off boards. You want backing at least 150 to 300 yds of power pro, then your copper I run 80 to 100 ft of 20 lb floro leader then a 8ft 12 lb floro leader on the Fingers. You hook the board to the backing not the copper or you will brake it. Then run it out to the side and get it out of the way. I have run it like Splitshot also wich works I just dont anymore I usualy have to many rigs out so I like to keep the back of the boat clear. Sean

Will it pull some weight? And who should I get with to order one or should I just call Cisco? Thanks Sean

Anyone have the Dual Reel Mast with Electric Drive made by Cisco? Thing looks like it is built like a tank, but would like some info. Thanks Sean

I have the 9.9 high thrust with Yamaha remote controls and power trim and tilt. The set up is great. The controls are not cheap but you should only have to buy them once. Sean

Seneca 2009 Owasco Bows my daughter put in the boat.

No fleas on Copper or Lead use power pro for backing. If most of your time is on the Fingers I would go with 200' and a 400' copper, and a 4, 8, 10, 12, color lead core. Some days the lead is hot and some days the copper is hot. All of them above you can run on inline or big boards. Sean