njg0621

What's the price?

Kevin Davis was the best. Terrible that he had to go so young.

Well let's see the pics of all those fish!

So I caught my biggest steelhead to date in the river last weekend, the fish was 33" 13.2lbs. I decided to mount this fish because it is my biggest to date and I considered it a trophy IMO. Just wondering what everyone considers a trophy as far a minimum requirements before you would mount a fish?

Interested in you keeping the transducer and selling for $400?

So I have two bunks on my trailer and they are both completely shot and need to be replaced. I measured them and they measure 3"x6"x10ft long. I have never had to repair the bunks before so I was looking for some advise. Can I just use pressure treated? Does it need to be sealed? Do they actually sell a 3x6 or do I need to make one by screwing two 2x6 together. The boars are just lag bolted to trailer currently and sit vertically. Any advise is appreciated! Thanks!

Ha! It actually is now! I had it down when I first put it on the wall

14LB Brown Mount My buddy got into fish Taxidermy this year and has done a couple fish for me. His work is better than a lot of guys that have been doing it for 30yrs. I am really happy with the mounts! Here are some pics of mounts he did for me this year. Ice fishing Pike, Spring Brown and Spawning river salmon.

Yes they are much better than the last ones. Getting power from the down rigger to the plug isn't the issue. My complaint is the 2ft cable to get from the battery to the plug.... most boats don't have the plug that close to the battery compartment. I Gorilla glued it this morning....we will see what happens!

It amazes me the money that they charge you for this crap. 2ft cable from the battery....like that will ever reach where it needs to. Plastic collar that isn't a circle like the hole they tell you to drill. Then they call for a 30amp breaker and 10gauge wire on the rigger but correct me if I'm wrong that kit is 12 gauge. What a joke for $55. Thanks for the advise guys.

So I replaced the power cables on my Mag 10's wiith the new Cannon power cables. As most of you with Cannons prolly know you have to drill the hole out to 3/4 of an inch on the housing. Well one of the riggers went perfectly but for some reason the hole on the other is just a little too big. The collar provided doesn't lock tightly in the hole so it eventually works its way out over time. I have heard alot of things about using silicone based sealer caused some kind of chemical reaction and fried the boards on them. I wanted to use some gorilla glue on the collar to hold it in place so it doesn't move in that 3/4" hole. What are your thoughts? I need to do something to prevent it from moving.....

So I ran into a situation where I had 4 downriggers on my boat but I really only ever used two of them. I flat line troll a lot and striper fish so I always in need of rod holders. I thought to myself..hey, why don't I find something that I can quickly change between a rod holder and a downrigger depending on what I am fishing for. I looked everywhere for a mount and couldn't find anything. My buddy has a machine shop so he made me a mounting plate that attaches to any Cannon base and works with most rod holders, I have tested it on cabelas and scotty. Four bolts and I can alternate between my riggers and rod holders. The other cool thing is that the entire rod holder is on a 360 swivel base now which allows you to position it exactly where you want! Anyways I thought i would share some pics and see if anyone else had interest in this. The base is powder coated so it will never get damaged or rust. The price tag is $50 per pair...PM me if you are interested.

So I just got my new Terrova w\Ipilot this weekend and mounted it to the boat. I used the mka-47 quick disconnect bracket and everything is good. My boat came pre-wired for a 3 prong plug and the Terrova just comes with 2 wires (looks like battery connections). My question is what male adapter do I need to buy to go from the motor to the connector on the boat?