lakebound88

I will bet you were not deep enough. How long is your leader from flasher to fly? I run mine 18_21 inches ... Front hole, and more action hole... White green dot with white fly is a good flx killer. To the guys thinking we just hand info out, here ya go! This ones for you [ Post made via Android ]

Ed, we took a vacation to sampson for a get away and found some fish.. it was a blast... I'm hunting for salmon still [ Post made via Android ]

If anyone has or interested in a swap and cash, I may be interested. After fishing with a fishhawk, I like the facr I wouldn't need coated cable any longer. Unit is three years old. Works great and a spare probe. Nick [ Post made via Android ]

Scott, that was towards people who do know know the basic rules of the road... Right of ways... Etc.... Not towards you guys. Hopefully someone might read it and say oh boy I didn't know that! I backed down Saturday and Sunday both to a pleasure boater was was making an incorrect passing. If course was held an acident could have been capable... Courtesy is a must, but safety should always come first. [ Post made via Android ]

Price? [ Post made via Android ]

I agree with you guys. Also remind people though, the boat that is under power must avoid the collision. I just hope nobody thinks that if there is a collision that it is the jigging boats fault. Never know when someone might try to push their luck.. Nick [ Post made via Android ]

Isn't this site for sharing information?

Lol. [ Post made via Android ]

Peach orchard will treat you well. I will be out with a charter at four. Fish the four hundred line.... [ Post made via Android ]

Fished last night off peach orchard. Rods started flying before I got spread down, hit water at 3:30 . Hot lure green dot white SD with atommik halo fly. Spoon, the MS steelie stomper. Dipsys were dead. Riggers fished 45-65 and the SD was fished 130 down with ball speed of 2-2.1. Fish over 400 fow. If you don't make it out to evening, be patient, wait for that sun to touch that west hill above glenora, its a light switch, turns them on! Good luck! [ Post made via Android ]

[ Post made via Android ]

and dont forget the first mate! [ Post made via Android ]

what Pete said. I love how a single runs, but docking is rough. Not much control, even worse on the tunnel drives. I personally have a I/O with a volvo Duo prop on a 28 foot trophy. It handles beautifully.... I troll with a Yamaha. Are you dead set on getting a single screw? If not, and the size boat you are looking for is greater than 25 foot, I would recommend twins.. That's whats next on my list

Red bellies, somebody has been laying on bottom. That's a big eel! [ Post made via Android ]

Yea, love it up on the big o. Just can't justify keeping my boat there when I'm fifteen minutes to watkins glen.. someday I will be up. I had the pleasure to fish with brendan aboard team screwy louies.... Good luck [ Post made via Android ]

You bet Chris! [ Post made via Android ]

shad, it was neat seeing your footage, as I was filming you as well.. Check out my video too. We were docked next to them ... Nick

Do you like fleas? If so, you will get your share with lighter line... Everyone is saying go heavier for a reasons, I am sure we have all started at the low lbs rating...

what he said. Also, if you want to run your coppers with that 3.5 setting, try speeding up a bit to keep that copper high and send it out on a inline or large board. I use inline boards made by church tackle. I run three on each side of my boat. Lead cores and coppers. stack them so your shortest copper or core is the furthest out. If you want more info on all of this let me know, I will explain it in detail. Down the chute with a 300 copper shouldn't give you any troubles. If you run your dipsys on a 1.5-2.5 it will take less line to get your desired depth , and less of a chance of tanlging, especially in a turn. Copper sinks pretty slow... Any more questions ask away...

Thanks guys!

Here is a quick edit for a tough day of fishing for the first ever Atommik Invitational. It was a blast to fish! Thanks Tom and family/friends for a great job and effort put forth to this event! Nick

Here is our short and sweet edit to the tough fishing conditions... Hope everyone enjoys! I haf a blast during this event from friday til sunday! Thanks Guys Nick

Parting out the Yan? Suprised to see it this last weekend. It looked great on the water Vince. [ Post made via Android ]

Dave antenori had a set for sale a while back. Call him. [ Post made via Android ]

hills and valleys has one in stock. Price looks better than internet prices..