Jump to content

Frogger

Members
 View Profile  See their activity

  • Posts

    2,834

  • Joined

  • Last visited

 Content Type 

Everything posted by Frogger

  1. Frogger
    That looks like east side near melons cove / pump house in I'd say 70-90 feet from the pic. Am I close?
  2. Frogger
    Is this tournament still alive? I just realized its last years posts on this????
  3. Frogger
    Sold Pending Payment
  4. Frogger
    I have a pair of Uni Troll's 6's (cast aluminum) that I am replacing with an early Father's Day gift, mag5's. First 225.00 gets them. Both have new clutch pads and bearing washers (47.00 from fish 307 parts). Bases included. 24inch booms. Cash. Pu or we can work out a place. Wayne county.
  5. Frogger
    Thank MCF, I was able to get some paint on line but its not as dark as I think it should be but wont know until I finally decide if Im going to do it. The decals have been the pain. Cant seem to find the '93 series for the 115hp anywhere on line. Ill have to get a shop to reprint them. I was just hoping someone might have some leads....
  6. Frogger
    Would anyone know a place that paints / decal work on a 115 engine cowling? Was going to try body shop but if there is someone out there that does it primarily I would rather go that direction. Thanks.
  7. Frogger
    I have the elite base, had to play with the kHz and trolling settings before I got it dialed in. One thing though I always got the down balls to show when I started. Do you see them at least?
  8. Frogger
    Pete, take it from bandrus looks like a bad jigging day, deep water 140-160 with 20mph wind says you won't be touching bottom like you should....
  9. Frogger
    Congrats to Jesse on the win, thanks Ryan for putting this on!
  10. Frogger
    Try xtreme navigation for lowrance. Got a good price on finder and down riggers last season
  11. Frogger
    Doritos and mountain dew
  12. Frogger
    Try boats.net. Had all the single parts I needed.
  13. Frogger
    Lobster, I don't think you have to worry about cooling. I have an evinrude that purrs down to nothing if need be. Are you sure that 2mph is what it actually is? Sometimes speeds vary between boats. If your dragging flashers on the bottom you will know your too fast with the throbbing and not staying on bottom. If your spreading spoons across the thermocline I'm liking that speed. As you may already know if your catching bows and salmon your fast if all are lakers pick it up a bit. If line is too far back go to a heavier weight. A drift sock as was mentioned off the bow does the trick though if truly needed at a min cost. Hope it helps.
  14. Frogger
    9am I heard
  15. Frogger
    A link with some directions on where to find the group, Ive got the bracket all set, looks like I need to get those spinnys ready!
  16. Frogger
    Hey Willi, so far so good. Unit was a little tough to get settings clear with downrigger balls but after a few outings I've got it looking good. Bought it with a rebate last year and this year it has a good price too. It doesn't have speed but I have the x4 for that or you can utilize the GPS on it. Overall pleased with it.
  17. Frogger
    I would check the one that has the plug to see where the pos neg are going inside the unit. If I remember right the positive went to the white circuit breaker but don't quote me. You would be able to find something on the net as far as a manual. Mine when it went still worked but sent a 1 volt through cable which isn't good. Should be .50 to .65 on the cable. So I replaced it. Just couldn't figure out why it wasn't catching fish off that rigger. Low and behold......
  18. Frogger
    Willy, here's my limited experience. Yours more than likely have the ion control with the features you mention with your up button. Cannon back in the day didn't advertise it as having it but found out in fact my older mag 10s did. You can only test the auto stop feature with the boat in water unless your an electrical whiz. The ion bit is always on so you wouldnt be able to turn it off unless you disconnect the green wire mounted to the motor. The system actually works through your cable which by the way has to be steel not braided. The circuit board can be replaced with a newer version, about 85 bucks from cannon. They will also guide you on the wiring inst as it is a little different than the board that's in yours now. Not to difficult to replace. The pos and neg need to be known before you wire it to battery. You will smoke it if you get it wrong. If you need the diagram I have it somewhere just would have to dig. The cannon tech was very helpful when I had the board issue. Hope this helped. Mike
  19. Frogger
  20. Frogger
    300.00 for the pair. Yes they have the short stops. Send me an email, I can send some pics. Cable is original and would suggest replacement.
  21. Frogger
    I have 2- Cannon Mag 10A's. Great working condition. Thought I could run 4 electrics when I bought 2 more. Found out I cant. Selling old ones to replace. Long booms, single rod holder on each. 300.00 or B/O. Pics available if needed. Newark
×
×
  • Create New...