Jump to content

Fishmaster 196

Members
  • Posts

    318
  • Joined

  • Last visited

Everything posted by Fishmaster 196

  1. I have 5 total size 1 lite bite slide divers with the large ring attached. All are in excellent condition. I also have 2 of the magnum 7oz weight kits and extra rings. All for 90.00. Call or text 716-673-6614.
  2. I have 5 total size 4 chinook divers with black tape. 4 were used on 1 trip and are as new, the other is new, never used. 75.00 for all. Call or text. 716-673-6614.
  3. I started to have issues with my 2016 9.9 yammi after 4 years of flawless trolling with it. It kept stalling on me while trolling. I read where they are set to run lean from the factory due to emissions standards. There is a small aluminum cap over the fuel mixture jet/screw on the carb. You can take a small pick and pry it up and off easily. Turn the screw to open it up a little. I have not had any issues since I richened the fuel mixture a little bit.
  4. I use it to steer and the kicker for propulsion. I lock in the heading I want to go in and can set lines and net fish when solo with no worries of getting spun around in the wind.
  5. I have a 80lb that I use with my 9.9 for trolling. It lasts 6 to 8 hrs of trolling when set on 3.5 to 4. For bass fishing it should last all day.
  6. Trim tabs will be money well spent. They are probably the best add on I have put on my boat. I bought Bennett Bolt trim tabs for mine.
  7. Without a doubt get the 72, if it is installed correctly it doesn't interfere with the windshield or docking. The extra length will be closer to the windshield so im not sure how it would interfere with casting. Buy a Cisco shaft support for it so the head doesn't bounce around when not in use.
  8. Add the additional lead weight at the connection of the leadcore and your backer line so that you still have the benefit of the whipping action of the leadcore. If you add the weight at the leader end the additional weight will kill the action. You can get an additional 5ft per ounce of lead added to line at 2mph.
  9. Looks like a Wasp Jak Hammer broadhead Sent from my LM-G820 using Lake Ontario United mobile app
  10. All sold Sent from my LM-G820 using Lake Ontario United mobile app
  11. He has 2 left, 100.00 a piece. Sent from my LM-G820 using Lake Ontario United mobile app
  12. 4 like new condition Cisco long cradle rod holders with track mounts for sale. They have been used for one season, only selling because he prefers the tube rod holders. $450.00, shipping included. I am posting these for a friend, please call or text him at 716-785-8762. Sent from my LM-G820 using Lake Ontario United mobile app
  13. This reel fill calculator should get you close https://www.thesouthend.org/index.php/resources/reel-fill-calculator Sent from my LM-G820 using Lake Ontario United mobile app
  14. Not sure what happened in your case but another member suggested to use 40lb big game for the diver to slide on due to fraying issues with smaller diameter lines. I have been using 40lb now for two uears and have not had any issues. I think you can find a kit that includes extra springs, beads and rubber tubing online somewhere. Sent from my LM-G820 using Lake Ontario United mobile app
  15. Yes, get one. Everything Beagler Described is correct. There are are hundreds if not thousands of smaller boats on erie and Ontario that use the bow mount for the purpose you describe. Make sure you get a shaft long enough for your boat. I need a 72" shaft on my starcraft, most can get away with the shorter 60" shaft. Sent from my LM-G820 using Lake Ontario United mobile app
  16. Pm sent Sent from my LM-G820 using Lake Ontario United mobile app
  17. https://southchathamtackle.com/store/store.php?crn=209&rn=597&action=show_detail I have been using the reel winder II combo for a few years, no issues at all. Sent from my LM-G820 using Lake Ontario United mobile app
  18. Pm sent Sent from my LM-G820 using Lake Ontario United mobile app
  19. Used stainless steel cabelas meat mixer for sale in excellent condition.. It is missing the small knob to tighten the handle but can be tightened by hand and snugged up with a wrench. Located in Fredoni NY. $100.00. 716-673-6614 Sent from my LM-G820 using Lake Ontario United mobile app
  20. I have the same steering on my boat and that is the fill tube. I included a picture of mine with the cap removed. I think what you are describing is normal steering. It will be easy out of the water but is definitely heavier while under load and is normal due to the prop and water resistance. Sent from my LM-G820 using Lake Ontario United mobile app
  21. Thanks Sent from my LM-G820 using Lake Ontario United mobile app
  22. Does anyone know what kind of tree this is?. They are growing In all of the open areas of a previously logged woodlot. Sent from my LM-G820 using Lake Ontario United mobile app
  23. Try this calculator out https://www.thesouthend.org/index.php/resources/reel-fill-calculator Sent from my LM-G820 using Lake Ontario United mobile app
  24. If you snap the weight on your leader you will loose the whipping action of leadcore. It is best to snap it on the leadcore near the backing to leadcore connection. Sent from my LM-G820 using Lake Ontario United mobile app
  25. Just leave it alone. After a while the deer wont even look at it once they get accustomed to it. Sent from my LM-G820 using Lake Ontario United mobile app
×
×
  • Create New...