Teleflex fix

[Has Been]

I don't know if this will help anyone but On my 16' alum ,the steering was getting pretty stiff. I drilled a 1/8 hole thru the plastic& just pierced the metal under in the back a few inches from where it went into the motor.

 

 I then took the tube of wd40 & some 3-1 oil & forced it into the hole. Then went back & forth w wheel. Did this about 10 times.Dirty oil was forced out each time. Forced some grease from my marine gun lastly. wrapped w/ elec tape & put a hose clamp over. Much improved.

 

 Also did this on my 21" a few years back as the cable was squeeking & driving my nuts. I drilled hole behing steering wheel & filled w/ white lithium  & it has never worked better.

 

 Should probably replace at some point but it did fix it for now.