Proos down rigger

[launica100]

I need to know how to wire the Auto Stop to the main control switch. I have a black/red and white wire that need a home on the switch. Thanks in advance for anyone who can help

[john07]

Wire your trainer so that pressing Push Button 1 energizes the mylowes contactor and it stays "latched" in until you press Push Button 2. Then mykohlscharge wire one of the contacts in on the contactor to turn on Light 1 whenever the contactor energizes. Use the top diagram to help you figure out how to wire it. Hint: The start button is normally open and the stop button is normally closed.

Edited September 20, 2021 by john07