Jump to content

L&M

Moderators
  • Posts

    2,784
  • Joined

  • Last visited

Everything posted by L&M

  1. There was a 275 earlier this year at Bayside Marina in Fair Haven.
  2. Have Scott look at it in the morning
  3. That unit is also compatible with a the Simrad GO5 & 7 series chart plotters too Wally
  4. Port Bay North Launch is open. The north dec state launch on W Port Bay Rd is now open, south launch is still closed.
  5. It can be used for either hyd. or cable steer Little. They were a good all around option for cable steer tho. Hydraulic Steering = Max. 7,000lbsMechanical Steering = Max. 4,400lbs
  6. Check the main black engine harness plug for tightness & corrosion before you get too far into it.
  7. L&M

    Sold / Closed Hardtop islander $3500

    Cjerome Can I get some pics https://www.lakeontariounited.com/fishing-hunting/topic/66282-hardtop-islander-3500/
  8. If you'd of known yesterday what today was going to bring I would of sent you with an extra. Everything else run ok Bob? Sent from my Moto G (4) using Lake Ontario United mobile app
  9. Unfortunately the launch is not open and it has been revised on there site now Ernie. The access road is open BUT THE LAUNCH ITSELF IS STILL BARRICADED OFF.
  10. L&M

    johnson 20

    All kiddin aside I think you will find you have a coil breaking down or bleeding thru to ground under load/acceleration.
  11. L&M

    johnson 20

    Actually I enjoyed watching the Farm Girl vid after yours a bit more than that 20hp with the coil breaking down but that's just me
  12. There both looking for 454ci / 7.4L big block engines Pap, not a small block.
  13. About 4 here headed toward Oswego. Anybody know why it was up this way?
  14. L&M

    Oil

    Make sure to use what they recommend as well as any additive they supply & follow there break in procedure to not void any warranty with anything from Jasper or any other re-builder for that matter.
  15. L&M

    Sold / Closed sold

    I took care of it bling, but here is your answer: If your using a L/T or PC open Edit in your original post , click the Prefix tab to Sold/Closed then scroll down & click Edit Topic . This does not seem to work with the mobile app yet tho.
  16. Look like this? http://mwands.com/store/35-watt-monocrystalline-solar-panel
  17. Gen 4 if it's the original engine then. I sent you a pm.
  18. 454 (7.4L) Gen 4 or 5 blocks ?
  19. L&M

    Sold / Closed sold

    Doesn't necessarily have to be an outboard only. System will work with most hydraulic steering set up's & can also be controlled with a Simrad GO5 or GO7 Chart Plotter Display as well as the Lowrance units.
  20. L&M

    Engine help

    You probably already have but make sure you have power to the purple / + side of the coil both static with the switch on & when your turning it over. Also check the main engine harness plug for corrosion.
  21. Thought it seemed familiar Phone number is listed at the bottom of the add. I bet a call or text to it would solve any speculation and alot of typing.
  22. No pun intended on the boat, but I'm afraid with that relatively low hard top you'd wanna be stocking up on Excedrin Dave.
  23. New restrictions put on boaters along shoreline Boaters will have to slow down to 5 mph within 600 feet of Lake Ontario’s New York shoreline after the governor ordered the measure to fight flood damage. Gov. Andrew Cuomo announced the new speed limit Monday. It usually applies within 100 feet of shore. But now flooding has affected hundreds of properties along the lake since early March, inundating basements and causing shoreline erosion in some areas. To try to keep boat wakes from making the problem worse, some cities and towns along the lake have established their own speed limits within 500 feet of shore. The governor says with the new state speed limit, boaters won’t have to figure out which town’s limit applies as they move along.
  24. Glad it all worked out for you
×
×
  • Create New...