-
Posts
855 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by J.D.
-
8/5 Braddocks
J.D. replied to wallysackett's topic in New York Fishing Reports - Lake Ontario (South Shore)
-
I have 2 older Scotty #1099 riggers, had the same problem this spring and had the same result. I sent them an e-mail and they called me at home to make sure they were sending exactly what I needed. They sent me 4 new counters, so I have 2 new on the riggers and 2 as backup.
- 1 reply
-
- 1
-
Not Necessary.. This is from the DEC Website.. General Regulations • An angler may operate no more than 3 lines with or without a rod. ⊲ each line is limited to not more than 5 lures or baits or a combination of both. ⊲ in addition, each line shall not exceed 15 hook points in any combination of single, double, or treble hooks.
-
It depends on the dodger. I use the old school Evil Eye High Speed Dodgers so speed is not an issue for me. They run well between 2.0 and 3.0 mph. Regular Luhr Jensen or Gold Star dodgers, low to mid "2's" is a good starting point. I just did a quick search.... looks like Evil Eye still makes the high speeds. The color selection seems to be limited.. https://dardevle.com/product/high-speed-dodger-98/
-
I've been on the lake since 1990, still use them all summer and fall. Squids or flys both work well.
-
How many yards of .028 backing on Okuma 45d, 333 yards of .018 copper
J.D. replied to jmco's topic in Tackle and Techniques
This might help... https://www.thesouthend.org/index.php/resources/reel-fill-calculator -
I-Bay 7/14 Trifecta
J.D. replied to BreakingBass's topic in New York Fishing Reports - Lake Ontario (South Shore)
Here's the link to the weather station at the end of the Coast Guard pier in Charlotte. The wind speed and wind direction are updated every 10 minutes and shows conditions from the past 24 hours. Seeing past conditions has saved many a wasted trip to the launch. https://www.ndbc.noaa.gov/station_page.php?station=rprn6 -
-
-
The Sequalizer is about $85 bucks. The Shelton fish Descender is about $13, plus adding your own weight. I made my own from a 16oz. weight and a coat hanger... works just like the Shelton product. Push the wire through the lower lip, drop the fish down to the desired depth and snap the rig up to release the fish. The Shelton Descender.... a bit small for large lake trout in my opinion. The Shelton Descender, and my homemade version
-
-
Braddocks 7/7
J.D. replied to whaler1's topic in New York Fishing Reports - Lake Ontario (South Shore)
-
Ramp, fuel, tackle, ...rooms and docks for rent by the day or week https://baybridgesportshop.com/
-
You also need to take wind into consideration. A cross wind will make the boat "slide". It will gives the appearance of a heavy down current when in fact the boat is being pushed sideways.
-
-
-
Mikeyman, I was one of the first Depth Raider users on lake Ontario many year back, so I might be able to clarify a few issues. You don't need to strip wire and ground it to the downrigger, just spool it on. Connect the power wires to the starting battery, not an isolated second battery. The starting battery somehow uses the motor to ground the system properly. Getting a reading in a bucket in almost impossible, per Kell labs. The system grounds itself once you're in the water. ( I tried the same thing when I first got mine, had the same result. ) The coated cable must be stripped back to make an electrical connection with the probe. I use a Walker Clincher with a solid marine connector and stainless steel #10 screw and lock nut. The connection you show in your picture looks good as long as the coating has been stripped off the end of the cable. Make sure the swivel and ball clip are not coated. A quick scrub with a piece of sand paper assures a good connection. Here's a pic of mine: I use Scotty downriggers, never liked the antenna springs, as the Scotty stop beads always got hung up in the spring. I took a 4 inch piece of 1/2" copper water pipe and flared out the ends, wrapped the spring around the pipe and coated it with electrical tape. The solid tube picks up the signal from the probe much better, and the auto stop beads slide right through. I have never fished "too deep" to not get a reading from the probe. Here's 2 pics of my mod. I usually run around 2.2 - 2.6 for speed and hover around that 50 degree mark to start out.
-
When the little guys are around, I run Scotty pinch pad releases with an 18" tether... much easier to see the rod tip shake..
-
I had a counter fog up this spring, an e-mail to Scotty got me 2 new counters under warranty for free. https://scotty.com/contact/
-
Slid out for a short trip Wednesday morning, in at 7:00, on the trailer by 10:00. Fished 40 to 170 straight North of the bay. NE winds and sunny, some color to the water but cold. 53 on top 47 down 50ft. Blank screen except a few lakers on the bottom in 140. Ended up 2 for 2, one teenager 50 down over 140 on the rigger, Stinger Stingray UV Two face, and one dink on a 5 color core hit a 3.0 watermellon Apex. Divers were silent. Enjoy the long weekend...
- 1 reply
-
- 2
-
Yup. I've added UV tape to a number of old flashers and spoons. I get my tape here: https://www.ebay.com/str/madrivercustomfishingtackle?_trksid=p2047675.l2563
-
https://baybridgesportshop.com/rooms
-
-
Sandy run - 4/30
J.D. replied to Tip-sea-tuna's topic in New York Fishing Reports - Lake Ontario (South Shore)