Jump to content

Sean Youngblood

  • Content Count

  • Joined

  • Last visited

Everything posted by Sean Youngblood

  1. Sorry my family is getting a little sick of fish and venison.
  2. As a heart attack I have 3 terrovas 80/AP/US2 54" 60" 1 55/AP/48" If I don't sell them I'm going to get a bunch of solar collectors and batteries and make a "green fishing boat" and maybe Obama will pay me to fish.Make me a good offer I know I can get top dollar on Ebay.
  3. I see your not getting a lot of input here,so i'll give you my 2 cents because that's what it is worth.I have had a boat that I put an auxiliary bracket on and now I have a boat I put the kicker on the transom.I like it better with the auxiliary bracket.I used a omc bracket and they are the best bracket I have seen and very user friendly.I use the easy steer and it worked better with the motors further apart.I don't know if the CMC bolts in the same holes as your old motor holes but you mite run into trouble moving your main engine over,with your steering,and would be worried about putting more holes near your old holes and weakening your transom it's an older boat.The boat I have now I put the kicker on the transom the person that had it before me must have had it on the transom also because it was scared up.That's one of the reasons I put it there after using the boat a couple of times I ran in from off shore and my kicker just about fell off the transom being a little rotted from people including me putting it on with the" death grip."I have it reinforced now but next winter I'll have to redo my transom and will be putting my OMC bracket back on.At least with a bracket you can put near the corner of the boat were it is stronger .I hate to make more holes but I think it's better.As far as off setting the weight I have always put kicker on the passenger side to offset it from my weight.Use your battery gas tank to get proper balance.Sorry for being so long winded.hopefully it will help.
  4. Sorry I went sat. and bought every terrova they had.They are going to be Ebay bound.I have been out of work and need money to support my bad fishing habits.
  5. Landshark it's good to see you on a ice fishing site on this side of the boarder(ah).lol.
  6. My friend Bob and I fished The Niagara river yesterday.We caught 5 Steelhead biggest 9.5lbs.While fishing the Stella Niagara drift we saw a deer that decided it would defect from Canada.It swam about 50 yards from the boat.It looked pretty tied by the time it reached the shore on the US side.This was a first for me.We went out to the Bar and got 1 Lake Trout on minnows.Slow day of fishing but a beautiful day to be out.
  7. I have 19.5 gls. I put the Terrova 101 with 60" shaft on it and use it on the Niagara,I don't have to fire up my big motor anymore when I get snagged.That thing rips.
  8. The one in the cooler looks like he ate a Key deer,no wonder they are endangered.
  9. Thanks Gezijamez I know of the Lord I think thats where I got my riggers from about 10 years ago.I thought I would try here first.I should just get new riggers but I have been out of work for a while and money is getting tight.If I trailer my boat to long Island again I think I'll take my riggers off they sure took a beating,but the blues and strippers sure were fun.
  10. That yammy sounds like a great deal they are great motors.The 4 strokes are so quiet and sip gas.With controls and elec. start, that's a steal.When I'm ready to upgrade you can help me.I'm always looking at motors on the web looking for that dream deal.I saw this it's not a t-4 but I like the looks of it.It might save you a couple of bucks.http://www.glangler.com/framepages/motorsforsale.html
  11. Just saw this long drive 4.5 hrs for you?9.9 johnson boat motor - $350 (butler) Date: 2010-02-25, 1:53PM EST Reply to: [email protected] [Errors when replying to ads?] think the motor is a 1990 or 1991 it is in good condition and i had it running this week used it all of last year it is a long shaft come see make me and offer just bought a new motor thank you jerry call 724 496-3782 or home 724-283-8035 Pittsburgh craigslist price is right.maybe junk?
  12. I have to agree with Chowder .I have 1990 15hp Evinrude long shaft ,in rough seas on the Big O it would grab a little air on the prop on the crest of a wave and almost swamp on the troth.It's not so bad now I have a alum. boat it rides much higher in the water.On my glass boat it would almost swamp.My Evinrude has elec. Start .That thing has run like a Swiss watch,for years and has never skipped a beat.You get the right set up with your kicker and steering and for me it has been the best investment I have made for my boat.I did what Chowder said when I installed mine. I line the Cavitation plate up with each other with my motor trimmed down and that was about perfect.But that was outboard to outboard.
  13. SinDale I'm with you I think the last thing I would put on it is carpet.I haven't used it on a boat but I would go with frp Fiber reinforced plastic.It comes in 4x8 sheets.It's easy to work with it can be cut with a plywood blade in a circular saw just put the blade in backwards.It dose not hold moisture like carpet,and your hooks don't get stuck in it.You can get frp at Lowes or home depot.I Have only seen it there in white and yellow.If you go to Henrietta Building Supply you can order other colors.If it were me while at (HBS)I would get 1 5eights galvinized metal studs and track to reframe it,as long as it is not in contact with alum.or other metal that it could react with.Yes over a long time it may leave rust stains but it will hold up a lot better than wood,much liter than wood easy to conform to curves.You can get it in heavier gauges 18 Gauge is real nice to work with.I built a casting platform in my freinds boat and it and turned out nice and has held up great,and was much liter than using wood.For the sheeting I wood use exterior plywood the frp will keep it dry.Leave your plywood up 1/4 " to keep it out of the water the frp will cover the voids.This is just my thoughts I am sure there will be some - feed back but I have done a few boat projects and have had good results.Good luck.
  14. Looking for Big Jon parts.I need a new base that the boom mounts to.It is worn out making the boom tilt backwards.(worn out from catching to many fish Ha Ha)Switch cover broke and end pulley broke.Has any one ever replaced the end pulley ? Whats involved.The base is the main thing I need,everything else I can get from Big Jon. (older model with 4ft. Tilt up boom)Thanks
  15. Dose this mean your changing your user name.lol Congrats Glad your back in the game.
  16. Fished 2/20 with two friends boated six steelhead lost two at the boat,between 5 to 9 lbs. Two Lake trout one about 9 or 10 lbs. one about 14lbs.and one Brown.Fished all day,Fishing was a little slow,but nice mix.All fish caught on Quickfish.Nice day on the water great to boat fish again.Nice to see open water instead of looking down a 8in. hole.
  17. I don't agree with killing muskies. but it is not illegal to use perch in NY for bait as long as you count them towards your daily limit and you do not transport them by motor vehicle,and they are used in same body of water.
  18. The Niagara River has had good runs the last 2 years.The run is at the end of April beginning of May.You are allowed 8 quarts a day per person.I have done good at Artpark in Lewiston.Watch Bill Hilts Reports in April to find out when run begins.
  19. 3 Boat Motors For Sale - $750 (Conesus) Date: 2010-02-10, 10:08PM EST Reply to: see below 15 Horsepower Johnson Outboard Motor Long Shaft 1979 Low hours With tank and hose Recently serviced Runs good $400 or best offer 6 Horsepower Twin Johnson Runs good $200 9.9 Mariner Runs but needs work $150 or best offer $750 for all Will separate Call 585-346-6599 or 585 278-3459
  20. There is a pair of uni-troll 10 on www.glangler.com go to swap meet under fishing tackle,Mics.riggers listed 2/14 Was $350.00 up for offer.
  21. Post subject: 15 Hp outboard Evinrude motor for sale PostPosted: Tue Sep 29, 2009 11:04 pm Offline Joined: Tue Sep 29, 2009 10:50 pm Posts: 2 Hi everyone * $ 400.00 * takes it away I have a 1989 15 HP Evinrude outboard mortor for sale This is a long shaft Over 125lb compression PULL START -- NOT ELECTRIC but one can be installed Two 5gal steel gas tanks New Fuel line with bulb pump This is very clean I promiss you will not be dissapointed in her condition - or performance Sorry No Photos at this time I am located in wyoming county E-mail me [email protected] if your intrested JK PS soon at it is Sold I will mark it sold here so every one knows
  22. 1994 8 hp johnson outboard - $750 (irondequoit) Date: 2010-02-12, 12:26AM EST Reply to: [email protected] [Errors when replying to ads?] 1994 short shaft 8 hp outboard motor with less than 25 hours use. This motor has been stored properly for 12 years and only used a few times. Motor looks and runs as new.Comes with original 3 gal metal gas tank and hose. this would be a great buy at 1/3 the cost of a new one.this motor is mint.call 585-520-5117.sorry no pics. I know it's not exactly what your looking for but it sounds like a good deal. Rochester craigslist 2/12
  23. My friend in Florida has one I have fished out of it many times.His is a bit older.His is a walk around cuddy with 225 hp.It is a good boat but it rides a little rough in choppy water. It is pretty flat on the bottom slaps the water a little when choppy.They have a good reputation.They are almost the same as a Grady White.
  24. Trolling82 I have used ez steer for about 10 or 12 years. I have been pretty happy with it.I have a extra standard steering tube that adjusts from 23 to 36in.I don't have the hardware for the motors.I would let go for $60.00 if this would help.It sells for around $160.00.Kicker hardware is about $75.00 online I don't know how much for outdrive connection.If you are interested you can pm me.
  • Create New...