JakeyBaby

Do you happen to make them for cowbells? The S/D ones you sent me would work great on cowbells I would think!

Atta Boy Hunter!!

Looks awsome! Yea it's tough to lay down more the expected to get the exact results that you havr in your head I used a vynal sticker to lay the name down. Whent over it then peeled it up. Came out much better then expected. Rough installed them tonight to test fit and I happy with results with Kiwigrip at this point!

Another thing was the Kiwigrip was A LOT thinner then I thought it was going to be. Looks much thicker on all the videos I watched on it!

I used a 4 inch putty knife. 1/8 in sarated trowel would definitely be the way to go. I thought the trowel I had was 1/8 but was 1/4 and that would have just made a mess.

Yes, make sure you lay your kiwigrip down as even as possible through out the whole area! I have a few spots that wasn't even and now I have to go back tonight sand it down a little and add more product. The biggest thing I would suggest is keeping the pressure with the roller as consistent as possible! Otherwise you will have high peaks and valleys in spots and little texture in others. Just keep the same pressure and go back and forth and side to side and will lay out nicely. The harder the pressure the more coarse it will be, alot of mine came out a little coarser then I wanted but doesn't really seem like it will be to bad on your feet any way so it is what it is! Overall seems like a great product.

Well I finally completed my deck hatch repairs and refinishing minus the hardware ware!! Lot more hours and money then expected but pretty happy at this point with the way they turned out. Final step was laying the Kiwigrip non skid. Added a little of my own touch to the main deck hatch by putting my boat name in the non skid. Can't wait to get the boat wet soon, been dieing to get the boat done. A little more buffing and waxing and she should finally be ready for the dock.

Don't do it! I did it when I first got my boat with the newer style cannons, and lost the the setup! I was fortunate enough to pop the rigger rod and catch the wire on the diver rod with my free sliding cheater and retrieve it. NEVER AGAIN!

Same size dipsy in each pic and they are not mags fits good in booth size diver docks

9 total.... 4 mag and 5 standard. Pretty sure the mags will fit all sizes. I will take $30 for all of them plus shipping if need.

I have a bunch if them I'm going to sell if interested. I just have to locate them to see how many I have.

Good info! I am not using Gelcoat, I used all West Systems Epoxy resin for repairs and the Pettit EZ Epoxy is a one part paint.

" Kermits Finger " and is anyone asks where the hell did you come up with that? You just ask them "what's green, slimy and smells like Miss Piggy"? Plus your a Finger Lakes guy....

Layed the final coat of Pettit EZ Poxy ( 3 coats) hope it's enough. First time attempting a project like this. Going to let the paint cure for a few days then Kiwigrip non skid will be layed down then hardware reinstall then tackle the rest of the boat!

This isn't the only one going around..... must be the 2nd winter we have kicking in! LOL

Where are you located?