Jump to content

finsntins

Professional
  • Posts

    1,176
  • Joined

  • Last visited

Everything posted by finsntins

  1. i had 2 mag10 stx with 3 seasons on them with no issues with cracking.i used blacks releases and tighten the rod tips about to the water line.
  2. thanks glen,ill give them a call today.
  3. i called them a few weeks ago and the guy that answered the phone said they were only pumping out the campers in their campground and that they could not pump out boats,even though i see the pump out machine sitting right by the gas dock.i got the feeling they are only taking care of their own customers.
  4. thanks todd,can anyone recommend a porta-potty company in the area that might be able to come to the marina to pump a boat?
  5. mexico point pump-out station? heave not been out in a couple of weeks and was wondering if the pump-out station is working or is it still under water?
  6. i cant help you out with fishing info. on tupper,but i would fish tupper and stay there,dont even think about heading south towards the old forge area to fish.now that schools are closing it will be an absolute zoo in this area and you dont dare put a boat on these waters until after columbus day.
  7. okuma magda pro 30's,best bang for the buck.dont waste your money on the convectors if you go with okumas.
  8. with the high water conditions and seeing the headline,i thought maybe we would get some reports of guys trolling the parkway,nope,just another non-fishing report in the fishing report section.
  9. 4-stroke all the way,no smoke and fumes to deal with.4 hp is enough,i have a 5 hp on a 16ft center console and now just put it on a 18 ft glass cabin boat and it pushes that just fine.only down size is vibration,single cylinders vibrate pretty bad,but i got use to it after awhile.also,look into getting a controll king to operate the throttle,way better then a control box and cables.they only work on 4-strokes.
  10. mrclean,you should take up carp fishing,a couple corn niblets or a dough ball on the end of a hook and hang on!!!!!only fresh water fish i know of other then a king that can scream off a couple hundred feet of line off a reel.
  11. tunas reel troubles in ludington,mi.very reasonable and fast turn around times.
  12. "this old boat" section on the home page would be a good place to post info. about your decals.and other "boat"related stuff.
  13. thats really great,oh great one,but what does decals have to do with fishing reports?
  14. im with buckmaster,trolling bar is the way to go,no bending over to hook line to release,bring weight to the surface,cinch in ball retriever and your release is waist high.
  15. you should be able to find a trailer for 5k to carry a boat with a 10ft beam,you still are going to need another 20+k to buy the boat though.
  16. when you lift the throttle linkage on the carbs you are not advancing the timing thus flooding the motor.the only way to raise rpm's on a 2-stroke is to do it with the control box throttle.put it in gear and run it as if you were on the water,just dont over rev the motor and make sure no kids or animals are running around.if it still acts up,i would check compression.
  17. are you putting it in gear and using the throttle on the control box to increase rpm's or are you raising the rpm's buy lifting the throttle linkage on the carbs?
  18. port lodge is in port ontario/pulaski,its about 20 miles from wrights landing in oswego
  19. Good to go.there was 6boats out yesterday
  20. give beth a call at mikes marina 315-963-3119.i have stayed there many times,they are decent and i believe if he has the docks in by then,you can keep your boat right at the marina.you may have to leave a message as they are not there every day yet.
×
×
  • Create New...