Jump to content

freebird18

Members
  • Posts

    85
  • Joined

  • Last visited

Everything posted by freebird18

  1. Made a solo trip out of Wilson. Started in 150 straight out. No marks until 265 heading towards Toronto Skyline. Good temp down 55 ft. picked up a Coho then a very big steal head . Marked a good number of fish between 265 and 310. had a screamer on but dropped it at 405 ft. Weather looked spooky and got the hell off at 7:30 PM. Screamer came on meat down 70 ft, Steal head and coho at 55 ft on Stinger alwife pattern. Hope this helps. Happy Forth, while we still have one ?
  2. Thanks for this report, heading that way Thursday. Helpful to get a game plan to start.
  3. Finally able to get a very good friend out fishing on the Big O. At 86 not many more days left to enjoy a day on the lake. Started straight out in 200 and trolled NW to 400 FOW. Turned and headed SE toward Olcott into 160 FOW. Been fishing Ontario for more than 35 years. Been skunked a number of times, but it was extremely disturbing that NO FISH showed on the screen. Have 2 units on board and used both thinking maybe one was just fuzzy. Trolled a distance overall about 12 miles in total. Seen one mark 55 down over 370. That was it. No boats out, seen only one other boat all day. No trailers at Wilson, 3 trailers at Olcott. Something is definitely wrong with Ontario. This was a strange day on the water. WOW, got me wondering whats out there.
  4. Appreciate the tribute for your father. memories last forever. God Bless.
  5. Voodoo, thanks. I think that's going to be be my best option.
  6. Orangediablo, only used ! time this season just to check. Battery is a Lithium/brand new. Checked the cable last fall and will check again. Appeared to be fine. May consider running a separate wire directly to DC battery. Will look to upgrade the insulation procedure and eliminate as much bare wire as possible. I appreciate your taking time to offer some suggestion. Thanks a bunch.
  7. Looking if anyone with a Sub-Troll 900 has had issues with faulty temp readings. I was getting 83 degrees on my unit this past week. Has this occurred on yours, what possible solutions did it require to eliminate. Appreciate any and all responses. My unit is about 12 years old. There is NO water intrusion into probe. Using a Lithium battery as well. I did use a Swivel between the Cable end and probe. Many Thanks, Tight lines, smooth sailing.
  8. First time out of Wilson for season. Fished west trolling 200 - 265. 1 small King and 1 Laker. I have never seen the amount of trash in the water for so long a stretch. I did mark bait but very few fish showed on screen. Wondering if anyone else encountered the same. My opinion is this Debri field has pushed the majority of fish away from this area of water. Spoke to a couple of guys out previous three days and they all said fishing just stopped upon it's arrival. Have encountered scum lines in past but nothing the size of this one. Be interesting to hear comments from those who may have witnessed this the same day or prior to Friday. Any Idea's and consider it's impact on the fishing.
  9. The Nissan rep had mentioned that in the Northeast there a number of atmospheric condition which affect fuel. The # 1 cause of issues with outboards are fuel related. Using fresh gas ensures a more cleaner burn as gas deteriorates quickly. Whatever fuel remains in my 3 gallon tank, I top it off. I haven't had a single fuel related issue using this method. Larger tanks are prone to moisture and condensation. I also now never fill my main tank which is a 70 gallon capacity. I know how much fuel I need for any given trip offshore and keep a 10 gallon reserve. That way I am always using fresher fuel. Since I started using this system, I have not had any fuel issues with my main engine which is a 350 Merc. I check the Water /Fuel separator each spring and find NO Water when drained. I check it eack spring prior to start-up for first time. As convenient that it may seem to plum into the main tank, I am convinced a separate fuel tank for the kicker is the best possible option.
  10. I like Yamaha, but they really screwed there customers in 04 when they neglected to inform Owners of a major problem with there Exhaust Tuners on the F225 motor. They burned a lot of bridges with existing customers. I know of one personally. 8K fix. Imagine if you were running twins. Got to stand by your product. You see a lot of rigs available this vintage year and have these same engines. If you consider buying one, do your homework.
  11. These things would destroy Walleyes with a crawler and Lakers with a skirt. Better priced than spin& glows.
  12. FYI, I had purchased New in 2000 a Nissan 9.9 4 stroke motor. I estimate I have at minimum 3000 hours on this motor. It runs like new till this day.Nissan is now Tokatsu. Both motor choices would be good, just one thing I learned from the company rep in California who suggested to me to NOT plum the gas from main engine tank and always use a separate fuel source. Followed this advice and have been greatly rewarded with an engine that performs flawlessly to this day. Chang Oil every year along with gear oil, new filter as well. Spark plugs every 2 years. This Nissan get 12 hours of trolling walleyes on 3 gallons of gas. Get about 9 hrs for salmon. I will not hesitate to buy another one if ever needed.
  13. Could use for spare parts. Offer you 100 shipped. Please let me know asap. have a potential for another, Thanks.
  14. Hey Dublin UP, sorry I could not get there Monday. Had a family member test positive and do not want to endanger ANYONE. NO Symptoms myself, but as a caution for others have imposed a self quarantine to end of next week. If you have interest in your items, do not hesitate to sell. Want to update so those who may be interested can purchase. Thanks,
  15. Drop me a location and I will try to get to look over on Monday. 4/5 21 Thanks MJ.
  16. Thought I would post to determine if any woodworkers may be interested in this collection of Precision Woodworking Tools made by WOODPECKER. If you are a woodworker, or may know someone who is, these tools are perhaps the finest precision instruments you could find for your craft. It includes the following items: SAW GAUGE / TRIANGLE / STRAIGHT EDGE RULE / CLAMPING SQUARE / BOX CLAMP / T-SQUARE/ PRECISION COPING SLED. This assortment contains some items no longer available. They are in BRAND NEW CONDITION. They have never been used. Must be purchased as a package. WILL NOT SEPERATE. You can look up these tools online to review costs if you like. Would make for a very special Fathers Day gift. These items if purchased separately would cost well over $850. I am selling entire lot for $500. Cash or PayPal only. (Pick up from my location in Hamburg, NY or buyer pays shipping cost. (Weight of these items is around 32 lbs. so you can determine the cost to your location.) Thanks for looking. Have a Safe and Healthy year on the big O.
  17. I have 1 Penn 230 GTO reel and 1 spool ( 600 ) of Opti 30lb copper ) Both are Brand New never used. Will trade plus 100$ Cash if interested. PM . Thanks.
  18. Pic of the boat might help you sell it.
  19. Check out Big Water Boats in Duluth MN. Got a nice 278. 1993.
  20. if this unit is available after you review potential prospects ahead of me. Drop me an email, I can pic it up at your location. Thanks. MJ.
  21. If still available let me know.I will be in the area today to pick up.
  22. Looking good friend, keep it going. Some great colors for Walleye in this mix.
  23. Typical on Craigelist and other sites offering boats for sale they have these characteristics in common. No Hull ID # pictured. No background views to determine location. Limited photo's, usually no more than 3. No Licence Plate Photo. Use only email for responses. Prices obviously way off they mark. Flag them whenever your in doubt.
×
×
  • Create New...