Jump to content

Hawkeye50

Members
 View Profile  See their activity

  • Posts

    420

  • Joined

  • Last visited

 Content Type 

Everything posted by Hawkeye50

  1. Hawkeye50
    Haven't been in O town in a few weeks,heard fishing has been very slow,heading up Friday any recent reports? Also just realized the Atomic tourney is this weekend ,thinking Wrights should be a zoo.
  2. Hawkeye50
    Try angling the kicker motor attachment towards your main engine.I have also had to tighten set screws on mine.Be careful not to overtighten.
  3. Hawkeye50
    I believe there are a few transient slips at Oswego Marina on the opposite side of the river.From what I have heard you can still launch at Wrights.
  4. Hawkeye50
    Can you still launch and park at Wrights?
  5. Hawkeye50
    Were you able to launch out of Wrights?
  6. Hawkeye50
    Looking for Gander Mountain 10' dipsy Rod They were heavy action ,brown color blank,Don't think they are still in production
  7. Hawkeye50
    I also used same air line fitting on my ez steer,worked great and cheaper than buying replacement fitting from manufacturer
  8. Hawkeye50
    Looks like a jigging box, have seen them before used mostly for landlocks.However have never seen one from Cannon.
  9. Hawkeye50
    I would opt for an 8hp 4 stk have purchased 2 Tohatsu kickers in the past ran great with no issues and relatively light,If I remember weight was about 80 lbs.
  10. Hawkeye50
    I normally fish out of Wrights in Oswego however since Wrights seems to be out of commission until god knows when,if ever would like to know just how crowded Mexico launch is in July and August.I haven't fished there in 20 years.
  11. Hawkeye50
    Is the launch accessible at Wrights? And what about parking?
  12. Hawkeye50

    Oswego

    Hawkeye50 replied to sid's topic in Open Lake Discussion

    From what I have been able to determine Mayor stated Marina closed until July if they open at all,however have seen several posts where guys have launched at Wrights with no problem.
  13. Hawkeye50
    What port did you launch out of ?I have heard mixed reports that Wrights is closed,yet some still allowed to launch. Also any Salmon reports on Lake George yet?
  14. Hawkeye50
    Ugly stick,I use Gander Mountain 10' rods would love to pick-up a 1 or 2 more but can't seem to find any,don't think there made any longer,great rod for slide diver.
  15. Hawkeye50
    I thought yesterday Oswego mayor stated launch is closed indefinitely?
  16. Hawkeye50
    On a boat I had few years ago mounted cannon mag 10s with gimbal mounts with o problems.What I did was install oak backing plates under the gimbal mounted rod Holders.
  17. Hawkeye50
    Be careful mounting too far forward on tight turns run the risk of cable tangling in Prop.I would mount them on rear corners. Good luck.
  18. Hawkeye50
    I use small bead chain in Spring, helps keep debris off Lure,later in season will change to heavier bead chain to connect leader to main line on spoon rods.
  19. Hawkeye50
    Does anyone know for sure if ramp is open? So much confusing info out there,website says open,have also heard facility is closed until July.
  20. Hawkeye50
    Found mine at Home Depot last year.
  21. Hawkeye50
    Yes.Finally after several tries I got it done.Hooked -up to truck and worked actuator back and forth,then bled brakes with a pump sprayer and clear hose,worked like a charm.Always amazed at what you find on utube.
  22. Hawkeye50
    Towing 18' trophy,loaded approx 3500-4300 pounds.
  23. Hawkeye50
    Thanks guys,tried vacuum bleeder,with limited success,will give it another try later this week,at least it keeps me busy these days .
  24. Hawkeye50
    I tried the gravity method,no flow.Also used harbor freight pressure bleeder,still did not get good results.This am tried pumping with screw driver from actuator,again little or no flow,pulling out what little hair I have left.Thinking about taking trailer to local auto repair shop.
  25. Hawkeye50
    I have been attempting to bleed the surge brakes on my single axle trailer and after trying several methods can't seem to get all the air out.Jacked-up trailer and spun wheel activated coupler and wheel did seem to brake.Any thoughts?
×
×
  • Create New...