BAITNH

heading up there on Saturday for a couple weeks I sure hope so

there is a update that you can download to the HDS touch gen 2

there is absolutely no need for a ABEC 7 bearing on a fish reel stainless yes

I am going out 4/18 for 2 weeks I will let you know

is there any place where you can keep your boat in the water and also stay there ?

thanks for that John I dropped the hitch 4 inches cause the F350 is pretty high she rides level now.. I have learned a lot about boat trailers the last week or so.

I took the back set of rollers off and moved them forward in an empty pre drilled spot then moved the boat 6 inches forward took it for a spin got to 65 with no issues, now im going to pump out some fuel and get some urethane caps to put on the back of the trailer I will see how that works talking to boat on and off the bunk tilts right down so I don't think it will be a major issue if so the saws all will fix it. A big thanks to all that responded this site is priceless and a awesome group of fisherman here.

the 6220lbs includes the weight of the trailer I think is 1350 going to find that out. I think rather than move the axle with 4 bolts I can take the most rear rollers out and move them forward. it seems a easier task.

I just sold a 96 with 115hp and 9.9 kiker with electronics for 8500.00

towing a 23 ft boat w 200hp and 9.9 kicker on an Armstrong bracket cant go over 50-55 mph. trailer I s a load- rite rated 5400lb boat motors and trailer weigh 6220 with 125 gal of fuel. On the hitch weigh 5760 I did the tongue weight with scale figured 540lbs I have brought the boat 4 inch forward on the trailer I cant go more unless I move a set of rollers or move a axle . Pulling with a F350 v10 and already dropped the hitch 4 inches. Should I increase tongue weight up to 15 % Its a long way to the big O @50. any suggestion's????

if you can invest in a set of boards there are many places on line that show how to make your own for short dollars, also you can make your own mast a buddy of mine once used a heavy deep sea boat rod in a rod holder that worked fine for him. Im thinking it would really increase your catch

in early May there is not much of a need to run divers your best fishing is 5-20 feet of water until boat traffic gets heavy and or sun gets high then 20-30 is fine. The Chinook diver when released has much less drag than all other divers just sand the edges before using

yesterday at Moon Beach a few miles west the web cam showed all open water today about 100 yards of ice then open water the ice is shifting all over by doing that its eating up fast.

We will be a bit west of you starting in the 18 for 2 weeks