Jump to content

Nameless Fish

Members
  • Posts

    1,198
  • Joined

  • Last visited

Everything posted by Nameless Fish

  1. What do you hate about the TR-1? I've read lots of comments here about people with the TR-1 gold unit that say the exact opposite.
  2. Your iPilot TM is doing the exact same thing in the front when in AP mode. Difference is, in those videos you watched the AP is on the kicker motor.
  3. 9.9hp will be plenty for a 22ft boat, 20" shaft will likely also be enough (depending on how you plan to mount it). I would look for something with e-start and a charging system too. Power tilt/trim is an option to consider but not 100% necessary (again depending on how you plan to mount it). Remote throttle lever is another option but personally I would go with a tiller handle model and purchase an aftermarket throttle control unit (Trollmaster, iTroll) as it is much easier to control speeds with an aftermarket unit than the remote lever control and price difference would almost be a wash.
  4. Gimble mounts are not included!
  5. any word on what the seminars will be this year?
  6. I have a brand new still in the box pair of Wolverine slip resistant work boots (never even tried on). Size 11.... $100+ shipping https://www.wolverine.com/US/en/durashocks-sr-direct-attach-lined-6-inch-work-boot/18122M.html?dwvar_18122M_color=W03123#cgid=technology-durashocks&prefn1=toeFeatures&prefv1=Soft-Toe&prefn2=workFeatures&prefv2=Slip+Resistant&start=1
  7. That rubber mat is a great idea! I was concerned with the chair sliding around and marking up the deck, which is the main reason I posted this. Oh yeah and my father's safety a little bit too.
  8. Yes they are, I know I keeping saying I will post pics and I really will soon! Boat is stored for winter I just need to get down there and get some.
  9. I'll buy new not a big deal, I was just looking for brands to look into.
  10. Pm sent!
  11. Anyone found a good deck chair for non-slip floors? I'd like to get my father out fishing with me more this year but he has balance/standing issues. I wouldn't bring him out in anything less than optimal conditions but I would like to find a chair I can bring and setup on the back deck for him to fight fish while sitting. The rear facing seats in my boat now are fine for him to sit in while we're traveling but too close to the hardtop to fight fish in. Any recommendations?
  12. I have a different style boat (Hardtop WA) but my remote controlled spot-light is mounted right behind the cuddy hatch. Works very well there no glare.
  13. Still for sale... Riggers are in my basement but the battery end cables are still installed on the boat which is in storage until April. I will ship the cords to you in April at no cost if the riggers are purchased before the boat is out of storage.
  14. Cold Water are awesome reels I have 8 of them. You are going to need roughly 100yds of 20lb mono backing plus 1000ft of wire to completely fill that reel so the counter will be accurate. Just FYI.
  15. You could splice sections of mono into your leadcore and then have something to attach to your releases. Personally I think the more knots you add the more potential for failures you have so I prefer to run dedicated setups, but many people run segmented leadcore. I have acquired enough rod/reels over the years to have dedicated setups. I have 2,3,5,7,10 color leadcore setups, seems to cover just about everything I need.
  16. I’ll take this if it’s still available.
  17. I have a 2018 Tohatsu 8hp for sale if you’re interested send me a PM.
  18. Have you tried 3M 5200? That stuff is basically permanent after you apply it.
  19. Do you actually know where the leak is? Could be in a hose and none of that stuff would stop a leak in a hose. First priority would be finding the leak (or telling us where/what is leaking) and then we can better help with a repair.
  20. When you think about the price of the rod/reel/line/lure you will be putting in the rod holder... spend the extra on a quality rod holder especially for dipsey setups. Go with a Berts, traxstech, big jon, etc. First year I got into salmon I was using the same plastic Scotty rod holders I used for walleyes, first time a Salmon hit it I thought for sure it was going to rip it off the side of my boat! My setup with wire line and everything prolly cost well over $250 and I was putting it in a $12 rod holder. Needless to say I switched to Bert's ratcheting rod holders and haven't worried about it since.
×
×
  • Create New...