Search the Community

2007 Honda 50hp Four Stroke Long Shaft with controls. Has binnacle mount controls. Looks good and runs good. Unknown but low hours. Have shop manuals for it. $2900.00 or reasonable offer. Located in Dunkirk NY. Still on the boat so can hear run.

$150 for the pair. These chairs are the 1" aluminum frame. The cushions and arm rests are not ripped or torn. There is a small hole in the back of one chair. Visible on pic on the left chair. Local pick up only. I am in the Buffalo area. Call with any questions. 814-403-3492

For Sale Tackle Mate 240 (spoons not included) $30 Rochester area pick up

For Sale Cannon gimbil mount (12") with Cannon swivel base. No bolts for mounting swivel to gimbil $50 takes them both

For sale Wille Bait files Decent shape 3 card file and 4 card file $60 takes them both . Rochester area pick up

I bought this HDS 7 earlier this year and never mounted it on my boat. I bought a new screen cover for it on eBay. I added 3ft of red and black wire to the power cord, and a new water proof fuse holder. I used heat shrink connectors (butt end and ring terminal) because I was going to hook it directly to the battery on my 16ft row boat. It is complete with a gimbal bracket, knobs, power cable, sceen cover, and an HST-WSBL transom mount transducer. It has a working internal GPS and a working SD card slot. It has the latest software update, which enables this unit to control the Lowrance Outboard Auto Pilot. The factory installed mapping software is the Lowrance Base Map, which does not show depth contours lines. I have the Navionics Plus Regions East map card, and it works great in this unit. BUT, I'm keeping the map card for my other Lowrance unit. I'm asking $400 for the complete unit so I can get back what I put into it, OBRO.

4 Aluminum Track Mount Multi Axis Rod Holders . No idea of manufacture but similar to Cisco .... see Walleye engraved on each unit Great Condition $180 takes all 4

1995 Seapro walk around with 1995 Perfo trailer. All ready to go fishing! -2 down rigers and weights. Cannon 5x is brand new. - planer board Mast and boards - hummingbird fish finder and GPS - AM/FM radio and Marine radio - Berts pole holders - 4 stroke 15h Mercury kicker with EZ steer 150h Mariner - led submergible trailer lights -new tires Priced at $8,900 Call 585-610-0580 located in Wellsville NY

For Sale 4 Proos Electric Downriggers ...2 with 4 foot swivel booms and two rod holders and 2 with 2 foot swivel booms . I have never used these riggers but have tested with battery in garage . In fair to good condition Sold as a group.... AS IS $300 Rochester area pick up only

1987 Crestliner Aluminum boat (Viking V180 Deluxe) for sale. All welded construction (no rivets). Good, very solid condition. Only 2 owners. 18’ 7” long, 87” beam. 90 hp Evinrude (1986) with new VRO fuel pump and new stainless steel propeller. 15 hp Yamaha 4-stroke kicker (2004). Both motors run VERY well. EZ loader trailer with new Kuhmo tires. This is a genuine multi-species, multi-style fishing boat. Comes with 2 Penn downriggers, rodholders (I can throw in 6 more that aren’t shown in the photos) - everything you need for trolling. Also has a foot-controlled Minn Kota trolling motor and Humminbird Fishfinder. Boat is set up for trolling, jigging for walleyes or lakers, and casting for bass etc. Comes with a deep cycle battery and a starting battery, anchor, life vests, extra seats, fire extinguisher -- everything you need to fish successfully! Lots of storage space. This is an excellent boat for fishing the fingerlakes or Lake Ontario. Comes with other misc. stuff like bumpers, ropes and boat cover (although I have always had it in a garage). $5000 or $4000 without the Yamaha kicker.

1 used Berts rod holder buff bright- $60 plus shipping 2 pcs new 12" Cannon track (actually one 24" piece I cut in half and added countersunk holes..) $25 each or $40 for both plus shipping As you can see from the pics the 2 pieces of track are not exactly the same length, I cut it this way so I could use 1 set of the pre-drilled holes in the center of the 24" piece and added my own holes to the other piece. If you want all 3 pieces I will take $90 plus shipping, or pickup in Webster NY. I'll take Paypal friends & family or cash... Thanks

Downrigger weights, One 10# sold, 12# is $25 and 15 # are $30 each.

Pair of 10’ Blue Diamond Wire Rods For Sale. All roller guides. $100 for both pickup, $120 for both shipped. Located in eastern PA.

500cc 4x4 runs perfect clutchless 5speed wench on the front have registration, so yo can use it on the ice or public land $1800

Magnum Dipsy Divers $20 for the pair, Two yellow birds$15. Located in Sodus Point.

110cc, 4-stroke, automatic, 2 X 4, remote control stop, speed throttle limiter, electric start, brand new battery, runs great, only has had 5 tanks of gas ran through it. This is a compact little ATV! Top speed when wide open is over 30mph or governor it down to less than 10. I wouId say its good for riders up to age 12 and good for kids 4-12 depending on experience and exposure. I am not sure of the exact year but I think its a 2010. Single original owner, getting rid of it because it doesn't get used enough and the Honda Rancher has taken over. Its dusty from sitting in the garage, always stored inside. The seat still has the original wrap on it. Asking $475.00 Sold

2 Diawa Sealine 47 H Reels for Sale Reels are in excellent condition Firm clickers and smooth drags Reels are filled with 15# Berkley Big Game ( Green ) Reel Seats included Asking $65 for the pair Includes shipping Please contact by PM or Post

2 silver Cisco rod holders with indexing base. Mint condition. $80 each. Prefer pickup. Live in Conesus, work in Rochester area. Thanks. Sent from my SM-G930V using Lake Ontario United mobile app

2 sections of 48" track. Used, but good condition. No hardware included. Conesus area, but work in Rochester. Pickup only. $150 Sent from my SM-G930V using Lake Ontario United mobile app

Title says it all. Very good condition. Mounts were used on a Lund sport trac with the 45 degree angle. Conesus area, but I work in Rochester. $30 each. Sent from my SM-G930V using Lake Ontario United mobile app

I’ve had this boat for a little over a year and it’s been a great boat. It’s seen river in Alexandria Bay and also spent some time on Lake Ontario. Within the last year I replaced, all bearings tires and hub assemblies. I also put a 2006 E-tech on it as well as re-finished the teak wood on the sides. I also rewired most of the electronics on it as well. Bilge pump, searay vision, and all navigation lights work. It has cushions for the front. The upholstery is approximately 2ish years old. After the motor was put on last year i only used the boat for 20ish hours. Very seaworthy and runs strong. The only reason I’m looking to get rid of the boat is because I got a great deal on a hardtop Thompson. I don’t have time for 2 boats. One last thing, I re-wired the trailer last year with a full led kit. I did take all the electronics off and transferred to my new vessel. If needed I can throw in a few life jackets as well as a few other items. Let me know if you have any other questions, I’d be more than happy to take potential buyers for a trip in the water. 315-586-3950 I’m asking 7,500 OBO. IMG_4697.HEICIMG_5414.HEICIMG_5416.HEICIMG_5419.HEIC Sent from my iPhone using Lake Ontario United mobile app

Sold Sent from my iPhone using Lake Ontario United mobile app