Search the Community

$65includes shipping. $55 pick up Liverpool. 9 with #1 treble and 4/0 single and rattle. 9 with 2 #4/0 singles. Both with glow and uv beads and 50 fluro leaders. Includes box. send pm paypal [email protected]

FOR SALE- Minn-Kota Terrova Bow Mount Motor 24 volt 80lb thrust 60'' shaft Has I-pilot with I-pilot link Universal Transducer - works with any sonar Includes foot petal, remote w/ remote charger, and quick connect bracket Asking $1200.00 more info call (716) 988-3804

$17 $3 shipping #1 Mustad treble 4/0 octopus single 50 fluro 42” leader atommik flies assorted send pm Paypal [email protected]

For sale is a 2004 Johnson 4 Stroke 8hp outboard. This is a tiller, manual tilt/trim, manual start motor. This motor has a standard shaft length (15") Full tune up completed in 2017. Oil and lower unit gear lube replaced every fall. Non ethanal fuel only while under my care. This motor came with my boat and previous owner did not buy proper shaft length. Only selling because I bought an engine long enough for my boat. Used as a kicker only Motor starts and runs great. Serious buyers can see the engine run in my driveway. Asking $800 or b/o located in Rochester Leave a PM or text/call 585-456-3668 Sent from my SM-N960U using Lake Ontario United mobile app

The Nauti-troller is up for sale. 60 hp four stroke. All in good shape. No riggers or electronics. Great boat for any finger lake handles waves great with it's deep V. Motor is great on gas, always ran non ethanol. Runs 26mph with two people loaded. Trolls down to 1.5 . $6,000

Fenders These are TAYLOR MADE and are lifetime guaranteed. The list price for each is $65. They are 20" X 8". Good shape. Asking $75 for all three.

1987 boat and trailer. Lots of upgrades last summer and fall. I posted updated pictures below. I'm selling this boat because I bought a boat with a cuddy for my wife. This boat is a versatile fishing machine, from pan fish and bass to walleye and salmon. We bass fish with 4 people on this boat and never have a problem crossing lines. -1992 Evinrude 15hp long shaft kicker motor, 2 stroke, rope start, charges the battery and runs great ----Added a new kill switch AND throttle friction lock (to maintain trolling speed) in September 2015 -New prop for kicker motor, still in the box. The old prop is still good -Main motor is a 1986 Evinrude 90hp 2 stroke V4 with external VRO oil tank, runs great -New 8ft bimini top and hardware installed August 2015 -Lowrance color fish finder/GPS, LMS-339 with 50/200 KHz transducer and GPS -AM/FM/CD player with 2 speakers -2 Swivel bases for 2 fish finders, installed August 2015 -I paid a professional electrician to rewire the entire boat (minus the nav lights and riggers) August 2015 -He installed an extra fuse block under the center console and kept the original at the stern -New No-Feedback Sea Star Solutions (Teleflex) steering system installed August 2015, replaced everything but the steering wheel -New starter and solenoid for the 1986 Evinrude 90hp main motor (still new in the box). The old starter and solenoid work fine and are still installed -70# thrust, 24v Minn Kota trolling motor, 45" shaft, transom mount motor on a custom bow mount (removable) -2 Cannon Mag10A riggers on swivel bases with dual rod holders. They have the 3ft fixed boom (not attached) and the telescopic 24"-53" booms (attached). Both riggers also have the weight retrieval lines -New 200ft Cannon rigger cable installed on both riggers with Cannon terminal kits and short stop insulators May 2016 -Two 10 pound downrigger balls, black rubber coated -New Automatic bilge pump installed August 2015 -New Aerator pump installed August 2015 -New bilge pump hose and outlet piece, installed May 2016 -Aerator pump inlet strainer screen installed September 2015 -New compass August 2015 -New clear cover for the white nav/anchor light installed June 2016 -New thumb cam-locks for front storage compartment (not installed yet) -New fuel hose with primer bulb for the main motor, installed August 2015 -New motor well boot that covers the new steering cable, installed June 2016 -New trailer winch AND strap, installed May 2016 -Navy style anchor, I think it is 20 pounds, and new 100ft anchor rope still in the package -Big Jon dual planer mast and mount on front casting deck, like new condition -2 Scotty rod holders on the gunnels -Long handle salmon salmon net -2 aluminum rod holders on the gunnels -Swim ladder, the hang-on type -first aid kit -hand held air horn Added equipment; -three type 2 life jackets -two 15ft dock lines, new Aug 2015 -two boat fenders The boat has a large livewell under the seat in front of the center console There is also a swivel seat for the front casting deck The trailer is a roller trailer with buddy bearings. One of the rollers needs to be replaced Both motors have fresh gear oil and gaskets May 2016 Both motors were winterized and fogged October 2015 Boat was stored under a large tarp, supported by a PVC frame I made (which goes with the boat) Inside gunnel height is 31" 5 sets of rod holders throughout the boat in the gunnels and on the side of the center console 24gallon fuel tank, full of premium ethanol free gas, treated last fall with Sea Foam and marine Stabil Boat is 19ft long and has a beam of 86". Fully loaded, it will run 32mph GPS speed. I've fished 4ft conditions on Lake Ontario without any worries. I have owners manuals for both motors and shop manuals as well The trailer is registered for 2016 and the boat is registered thru 2018 I'm sure I'm forgetting some details, so if you have questions, ask away. PM me for my cell number. Price lowered to $5,000 for LOU members, or make me a reasonable offer, with or without the gear. I'm open for test drives too so that you know everything works as it should.

2 BIG JON DUAL ROD HOLDERS $120 EACH LOCAL PICKUP IN RANSOMVILLE NY

Selling some Roemer and Black releases. Two of the Roemers are missing the cable tension clip. $30.00 for everything in the picture PM if interested Thanks Jack

For sale is new, never used B&W 5th wheel hitch, model # RVK3000. This hitch fits 4 pucks in Ford truck bed, Fully articulating head allows front to back and side to side pivoting. Cam action latching handle for easy release, even when parked on unlevel sites. Polyurethane bushings provide a quiet, rattle-free towing experience. Three vertical adjustments from 16.75" to 18.75", 2" of front to back adjustment with three coupler positions 20,000 lb GTW/5,000 lb VTW. This was mounted in my truck, however I sold my 5th wheel trailer and never had the trailer attached to the hitch. Asking $800.00 OBO. Willing to meet at a reasonable distance. From Pittsburgh, PA area but camp near Erie, PA. Call or text 724-525-9015

2 traxstech 2 1/2" NON SWIVEL downrigger mounts. New, bought them but not going to use. Rochester area. $100 for the pair. Sent from my SM-G930V using Lake Ontario United mobile app

Great used working unit. I am just upgrading. Screen, mounting bracket and sun cover only. 275.00

Mix of Protrolls and spin doctors. Two are new. $60. Will ship at buyers cost or pick up in Macedon area. Sent from my iPad using Lake Ontario United mobile app

Everything works $275. Obo 269-235-2010 Sent from my iPhone using Lake Ontario United mobile app

I have (2) Scotty electric downriggers. (1) is Scotty 1117 with expandable boom to 60" and (1) is Scotty 1101, with fixed 30" boom. Both have upgraded aluminum rod holders. I also have (1) spare aluminum rod holder. Both have mounting plates but also have (2) 4" Bert's risers (will get this week from camp). Selling as used but I rest assure you, they never been deployed. Also have (2) 12 lb downriggers weights(both have 3 coats flex seal), (4) chamberlain releases and a few cannon releases. Asking $700.00 for entire package. If you want only (1) down rigger setup, $450.00each. Willing to meet at a reasonable distance since I reside north of Pittsburgh, PA. Any questions, please ask. Can call or text also, 724-525-9zero15. Thanks in advance. Brad

Two Traxstech PR-2000 planer reels with clamps and line. Used very little. $180 for the pair. Oswego, 315-447-5070

I have a pair of 1994 350 Chevy block Volvo penta inboard motors up for discussion. The motors have approx 4700 hrs on them. I am the original owner of these motors. Oil changed religiously every 55-65 hours. These motors have been babied their entire lives and have had any work done to them by Tom Barberra at East Fork Marine. Reason I am selling is to upgrade to fuel injected more HP motors ... Pm me for further details... $1,000 per motor...obo Sent from my VS996 using Lake Ontario United mobile app

2- Slightly used, Cannon Mag 10 downriggers for sale. Both have 2'-4'adjustable telescopic booms, ball retreivers, auto-stop, Positive Ion control, 250' stainless cable w/terminators, custom L.E.D. lights w/switch for counters. Includes 2 Cannon quick detach bases.Power cords have been upgraded. Emergency manual crank handle included. Have only been used for a few weeks each season.Will include 2 Big Jon, all metal, swivel bases.Swivel bases were purchased new 2 years ago. They are drilled and tapped for Cannon bolt pattern (Cannon plastic swivel bases are junk!) $650. plus shipping

has new linkage to engine.

50 miscellaneous walleye lures 3/4 of lures have never been in the water! Most new other in excellent condition. Just reducing some duplicates. Includes: Rapala Husky jerk deep 12 Bomber Long A 15 shallow and deep Daves Kaboom Smithwick Cabelas Matzu Kinchou minnow Matzu Challenger Reef Runner Mann's Cotton Cordell ** $125 with free shipping to lower 48 USA Paypal only Sent from my iPhone using Lake Ontario United