Cannon MAG20 dt/hs toggel does not function

[Steelers1]

I have a Cannon MAG@) DT/HS that will not activate when the toggel is moved either up or down. I checked the fuse and it is ok. When I put the electrical connectioins from the downrigger onto the battery posts I hear a clicking sound when the cable is tapped on the positive post. Wondering if the problem is with the switch. Would welcome any comments. Thanks

[Don Supon]

My same unit needed a new curcuit board and a tighter sleve for the motor drive-shaft. Mine was making similar clicking sounds, blew a 30 amp fuse, and refused to raise the ball. Had to retreive a 13 lb ball by hand from 60 down. Not fun! Cost of new board- $300 on that unit. Sorry for the bad news. Hopefully you will find a different solution.

Tony's Reel and Downrigger Repair (authorized warranty center)

Orchard Park, NY

716-662-3773 fax 716-662-3773

Capt. Eugene (Tony) Anthony

[REELJERKS]

Check thru the switch with a multi meter to determine if the switch is bad Open / close circuit ( switch ).

Here is a link that you can find the closest repair shop to where you live. Call and ask them.

SCREWY LOUIES

596 MAIN ST

PO BOX 37

FAIRHAVEN, NY 13064

315-947-6348

315-947-5229

http://www.cannondownriggers.com/ASC/

Mark

[GAMBLER]

I had a circuit board go in mine too. Same exact symptoms. I take mine to Screwie Lewies in Fairhaven.

[britty]

If it cost to much to repair taLk to cannon they have a trade in program and they also do repairs. They treated me great!