Jump to content

Deployment Question...


Recommended Posts

A friend of mine wants to get into running copper. If he's running 2 riggers, 2 dipseys, and 2 coppers<------on big boards what is the order of deployment and what should he have his dipseys set on ? I know this question has been asked before but I'm not into seaching tonight :lol: Thank you in advance.

Tom

Link to comment
Share on other sites

I always let my starboard diver out first and let it slowly fish it's way out, creeping out on a light drag as I'm deploying the probe rigger. You'd be surprised how many times that creeping out diver gets whacked up high out of temp before I can even get the probe rigger in the water. Then same scenario on the port side. Cores and coppers go out after the divers and riggers are set.

Tim

Link to comment
Share on other sites

Mid summer I like to get about 120 ft of wire out then let it creep. When running 2divers. When running four ,ill get inside divers creep both sides while I get a copper out. Then let the high divers go. This yr has been a little different. Cause usually a rigger will pop before you get to any of that. Lol

[ Post made via Android ] Android.png

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...