Wanted Looking for Pedistal Seat Mount for Big Jon Planer Mast

[bassman69767]

I'm Looking for a pedistal seat base for a Big Jon planer mast.  They don't make them anymore.  It's a Bjg Jon part number 8400SM.  If anyone has one please let me know.

[slow rollin]

I have 2 that bolt to the gunnel and the mast fits inside of it with the hand nut on the side. Not sure if this is what you need

[bassman69767]

I have 2 that bolt to the gunnel and the mast fits inside of it with the hand nut on the side. Not sure if this is what you need

I need the one in the picture above.  I have a Lund and it has a seat in the front.  This base allows you to plug the planer mast into the seat base.  You don't have to bolt it to your boat.

[Lip Rippers]

i think this is the one  your looking for ? look about right do you have the dimensions for the hole and the pole

 

 

      

[bassman69767]

i think this is the one  your looking for ? look about right do you have the dimensions for the hole and the pole

 

mount.JPG

 

mount2.JPG       

That looks like the one.  The outside diameter of the mast pole is 1 7/16", so about 1 1/2".

[Lip Rippers]

i have a inside dimension of about 1 7/8 outside is 2 1/2 depth is 2 1/2 that tappers down to 2  then there is a nipple on the bottom that is 1 inch by 3/4  there is 2 set screws in the side of the cup to tighten to the mast  if this sound about  right  let me know ill keep checking  on here for a reply 

[bassman69767]

i have a inside dimension of about 1 7/8 outside is 2 1/2 depth is 2 1/2 that tappers down to 2  then there is a nipple on the bottom that is 1 inch by 3/4  there is 2 set screws in the side of the cup to tighten to the mast  if this sound about  right  let me know ill keep checking  on here for a reply 

I think that sounds about right. 

[Lip Rippers]

sent you a sight pm