Jump to content

Shakemsam

Members
 View Profile  See their activity

  • Posts

    775

  • Joined

  • Last visited

 Content Type 

Everything posted by Shakemsam

  1. Shakemsam
    I am only aware of 1 transducer that works as a thru hull on aluminum boats. If I remember right, its called Alumaducer. I'm also guessing your 32' is a Marinette. Check the Marinette forum.
  2. Shakemsam
    You say the battery's are charged but have you tested them? Check all the terminal connections at batteries and battery switch. If all is good, tap the starter with a hammer and try it again. After that maybe jump the solenoid. Other than that, main fuse if there is one. Then maybe ignition switch. Get yourself a manual for the engine and start trouble shooting.
  3. Shakemsam
    Beagler, that's exactly what I was about to do. Just figured I would ask here before I got the dremel out. Glad to know it works!
  4. Shakemsam
    I really appreciate you checking. Do you know how old yours are? That would give me an idea of the age of mine.
  5. Shakemsam
    Thanks for the reply but those are the parts between the washers.
  6. Shakemsam
    Thanks Feeder! I'm a few hours away but appreciate the offer.
  7. Shakemsam
    Outer washer behind spool knob needed for an older electric. May have also been used on manuals. Not sure Thanks in advance.
  8. Shakemsam
    ttt
  9. Shakemsam
    ttt
  10. Shakemsam
    Can't speak to the Oswego area but the techniques are the same. Sticks and light spoons work best for Browns.Troll flatlines at the minimum and use big boards or inlines to increase your coverage. Also no need to wait till May/June. It can be productive as early as April depending on location and weather.
  11. Shakemsam
    PM sent
  12. Shakemsam
    Agree and disagree! Waiting for the hubs to cool down before entering the water is an excellent practice for the reasons you mentioned. Not many people know that or they are just in too much of a hurry to care. Greasing as often as you do is not the same as a physical inspection every year preferably in the fall. This eliminates any water in the hub from freezing during winter storage. I know you are being careful not to over grease but most are not. You recognize these folks by the amount of grease splattered on the wheel, or worse... underneath the hull from the rear seal leaking...or worse than that...a seized brake hub from grease leaking past the rear seal onto the shoes creating all kinds of fun! 19 years on the same bearings👍 is probably due to the quality of the bearing made 20 years ago vs. those used today.
  13. Shakemsam
    Don't really understand all the neg comments. I went out tonight and took a look..A very large inventory and selection of product just as the OP described. Way too much to list separately. Maybe in a perfect world...but that certainly isn't the case today, as we all know. 90% of what I saw were new items in original packaging and fairly priced. Not Flea Market prices but certainly fair and less than retail. It was worth my time to save a few bucks and good conversation. Highly Recommend!
  14. Shakemsam
    Im in Rochester as well. Im interested in everything you have for parts, depending on what is interchangeable. Shawn
  15. Shakemsam
    Looking for either complete 4ft booms or extension pieces for Walker Electrics. If you have something, let me know.
  16. Shakemsam
    Looking for either complete 4ft booms or extension pieces for Walker Electrics. If you have something, let me know.
  17. Shakemsam
    The only issue I had was that they were taken while the boat was stored. Now, everything removable comes in.
  18. Shakemsam
    Looking for 36" or (2) 18" Traxstech Track. Thanks in advance!
  19. Shakemsam
    On board charging for convenience only. Another batt if you go 24v TM. Separate breakers for the DR's to cranking battery I like a main fuse or breaker between fuse block and battery. Convenient when working on the electrical.
  20. Shakemsam
    Delete
  21. Shakemsam
    Just a thought...You could go with the 6" mounted to a 4" deep box and use it for storage.
  22. Shakemsam
    I wouldn't take it in. It's a pretty simple job and Youtube is your friend. Im a firm believer that anyone with a recreational vehicle of any type, especially watercraft or motorcycle...should learn and be able to do the most basic repairs/or service. It could make a life or death difference. JMO
  23. Shakemsam
    I was the only boat at Mayers last Sat. I wouldn't expect a crowd from people or perch. The launch is ok but its low..real low! Less that 2' from the launch to the first set of markers.
  24. Shakemsam
    Exactly!
  25. Shakemsam
    Yep.... Thank you for your reply!
×
×
  • Create New...