Jump to content

Sean Youngblood

Members
 View Profile  See their activity

  • Posts

    697

  • Joined

  • Last visited

 Content Type 

Everything posted by Sean Youngblood

  1. Sean Youngblood
    http://www.overtons.com/modperl/product/details.cgi?pdesc=Minn-Kota-MKR-18-Trolling-Motor-Plug-Receptacle&i=96510
  2. Sean Youngblood
    #2 in the parts list is a 5amp glass fuse if it blows you will have no power to the motor or trim.Look up your year and model # to find where it is located on your motor.You can get the same fuse at any auto parts store.Every outboard I have ever owned has a inline fuse like this.It's best to no where it is and keep a spare in the glove box.
  3. Sean Youngblood
    http://www.crowleymarine.com/yp/AR916141/electrical-3-f200txra-2002-200hp
  4. Sean Youngblood
    I haven't Fished the upper River in years.Hears a good map with depths. http://www.charts.noaa.gov/OnLineViewer/14832.shtml
  5. Sean Youngblood
    I fished the East end 2/26.Edges were bad from the water levels rising.Main ice was in good shape.
  6. Sean Youngblood
    The button in the middle of the cushion should be a snap. Gently pry it off with a flat screwdriver.There will be a snap receiver behind it that will be screwed into the bow.Remove that screw.I would imagine there are some fasteners were the two cushions meet in the corners also.
  7. Sean Youngblood
    It doesn't give the Bay depths it is very shallow.
  8. Sean Youngblood
    http://www.charts.noaa.gov/OnLineViewer/14805.shtml
  9. Sean Youngblood
    http://www.charts.noaa.gov/OnLineViewer/GreatLakesViewerTable.shtml
  10. Sean Youngblood
    Found this skull about 50 yards from my stand today.The one side that wasn't eaten up much had 6 points.
  11. Sean Youngblood
    Thought I would give the bow a try for the opener.Not a big buck but my 1st opening day bow buck.10 minutes later a nice buck came by at 50 yards ( I was glad he was out of my range)
  12. Sean Youngblood
    Great Job.
  13. Sean Youngblood
    Thanks guys your both winners.
  14. Sean Youngblood
    I am new to Yamaha's and 4 strokes.My new to me 2004 T9.9ELRC kicker motor has a slight oil leak.It is leaking by the mounting screw at the bottom of this part in the picture.I looked at all of the parts diagrams and couldn't find it.Better yet if you could name the part and part # that makes you the winner in my book.The screw is tight. The housing could have a small crack but I would guess a bad seal behind the housing.I Would like to get a new one ordered. THANKS
  15. Sean Youngblood
    x2
  16. Sean Youngblood
    There is a good sized parking lot to your left as you are pulling into the launch.
  17. Sean Youngblood
    PM sent
  18. Sean Youngblood
    Niagara Bar And Wilson can be easily reached from Olcott.The Niagara Bar is at the mouth of the Niagara River. There is a launch Right there by the Coast Guard Station. http://www.charts.noaa.gov/OnLineViewer/14810.shtml Here is a interactive map
  19. Sean Youngblood
    My Lowrance and my buddies Smart phone are not even close at showing the border.My Lowrance gives us I would say an extra 1/4 mile near the windmills.
  20. Sean Youngblood
    I have one that should work. Sent a pm with my #
  21. Sean Youngblood
    I have a pair of cables 12' long that are 1 year old.They came with a motor I purchased and were to short for my application.They came out of a 703 control box.Just cables no ends.$40.00 picked up or best offer.
  22. Sean Youngblood
    Watch out for fireworks Friday Night.
  23. Sean Youngblood
    Do you just buy them or do you make your own ? My break away cable broke a couple of years ago and haven't used my fishawk since.Would like to start using it again. last time I priced them they seemed a little pricey but then again so are rigger balls so I am a little nervous to make my own.Any thoughts would be welcome .If you make your own and have had good luck with them I would be happy to buy a couple at a fair price thanks.
  24. Sean Youngblood
    "Yeah that's perfect. Roughly how high are they do you think? Do you want to sell one"? 3.75" high top base is the same as a Humminbird base 3"x4"x3.5" I would sell you 1 for $25 plus shipping.
  25. Sean Youngblood
    I have a couple of Bert's electronics mounts.They are pretty ridged.I would think 1 would work if you don't get to carried away.
×
×
  • Create New...