AnglingAddict

Does anyone know if they are just doing the detached wall or the entire harbor? It seems like they have been working on the detached wall for a while.

Call Jon's little salmon river shop - I believe he had a couple of the green blank heartlands left as of a couple weeks ago when I stopped in - although unsure on length and action.

Unless there is something unique about your boat it shouldn't be a problem at all.

Mis-read it...sorry about that.

Pro-Am weekend as well

Some days no matter what you do one type of presentation won't fire. Riggers can be on fire one day and dead the next - same thing with wire or boards....if you are consistently having problems then you probably need to change something up - but if this is just one data point I don't think you should draw too many conclusions.

Probably not too much with the hull as it's tin, but the floors could be soft - motor, should be checked and run under load, and realize it's an older boat and you are probably going to need to work on it a lot.

I do! It arrived a few weeks ago and am rigging it and fishing it for the first time this weekend! Forgot to check on the evil eyes - but I think I have a few I would be willing to part with. Will let you know!

I will look....

Steve, What size are you looking for?

Water in the fuel - almost guarantee it. Get a water seperator installed and don't run any of the ethanol crap gas in the boat and you should be good to go. I used to have a 9.9 high thrust and can tell you that I experienced the same issues the first year I had it - installed water separator and only used non ethanol premium (pumped the first gallon into my truck to make sure any residual ethanol fuel from the previous customer was out of the line) after that.

I did mine this weekend - about $4.50 a foot for marine USCG A1 or A15 hose locally - might find it cheaper online. As already stated for the reasons above use the marine line. In addition it's kind of a PITA job, and your original marine line lasted about 25 years so you might as well just do it right. Don't forget to double clamp.

Comes with a Mercury hub kit - forgot to mention that. Can be adapted through use of hub kits to run with any brand motor.

Not Cannon's but these are like new http://www.lakeontariounited.com/fishing-hunting/topic/50313-big-jon-manual-downriggers/#entry346140

I have a brand new Mercury Tempest Plus 19 pitch right hand prop. It's a stainless prop in 14 5/8 X 19 pitch. Great prop for Walleye style and multi-species boats. Cheapest I found was around $420 on ebay. Willing to sell this for $325 which is much less than I paid. This prop has never seen the water. With a proper hub kit you can run this prop on a Yamaha, ETec, Merc, whatever... http://www.mercuryma.../elite/tempest/ $325 for the prop.

Okuma Aventa 13' Fixed Reel seat float rod for sale. Barely used. Cork is clean. Comes with an extra tip section in case the worst happens. $80 Baldwinsville, NY

Okuma Sirata Centerpin reel with drag. Barely used - spins like new. $200 Baldwinsville, NY