Jump to content


  • Posts

  • Joined

  • Last visited

Everything posted by AnglingAddict

  1. Can easily replace the with a new guide. Anyone who does rod repair can do this - it's not very difficult. Sometimes finding the exact guide if its a lower end rod can be hard but I imagine on the Telora's they are using something pretty standard. Feel free to message me if you want more details...
  2. What requirement drove you specifically to a walk-around? You definitely give up some overhead cuddy space and in general your cockpit will be narrower on a walk-around.
  3. See post right below yours….doubt you will find just the probe.
  4. I'm not sure I would be too worried about the small list that ensues from a kicker being mounted. There are a lot of ways you could move ballast around to account for the small offset if that's an issue. Between gear, fish coolers, 100 pounds of kings in the cooler at the end of the day. The only time you would probably notice it is in extremely flat seas without wind...ideally you want to mount the kicker as close to center line as you can anyways which minimizes the effective lever arm to reduce the torque about the central axis. The farther out from center its mounted the more of a list you will have.
  5. Balance the boat with your batteries opposite side the kicker is rigged on. If you plan to troll on a kicker its also a good idea to get one with charging capability.
  6. Tow service subscription AND a marine VHF in case your situation turns dire and you need to involve other boats or coast guard. Sometimes depending on your insurance you can add a towing service for a very reasonable cost.
  7. Most boats are always for sale for the right price....If you see something you like go talk to the owner.
  8. Most guys text info to each other rather than broadcasting on VHF anymore...not sure how much help listening to a VHF channel is if you are looking to zone in on some bites...at least based on the conversations I hear while on the water....
  9. Another plug for John Mann who did my canvas when I replaced it a couple years ago - great craftsmanship - impeccable fit and did exactly what I asked. I'm pretty particular about things and he didn't disappoint.
  10. Depends on the access below - I would tackle it from below - as you can cut the old core out, and then recore from below without causing the need for major cosmetic re-work on top - especially if it is a patterned non-skid floor. It's not that hard and you can use resin thickened with cab-o-sil or some other filler to get the core in place. You can then reinforce it from below using overlapping pieces of glass until you get the thickness you need. If done right the repair will be as strong or stronger than the original floor.
  11. Jon's boat is absolutely bullet proof and one of the cleanest boats you will see. Absolute steal here for someone looking for a great boat. Awesome fishability and ready to charter.
  12. Agree with Rick - We have 50/200 KHz thru-hull on the boat as well as have a Garmin Panoptix Transducer on the transom mounted 4" from the FIshHawk - all work as they should. Resistor plugs, and RFI Plug wires certainly help. Also make sure that your extra Fish Hawk Transducer cable isn't just coiled up and sitting next to a bunch of other wires/cables as when the bundle is coiled you can get inductive interference - better to coil the excess then give the bundle a half twist so you have a figure 8 loop - this will minimize any inductive interference that might be present.
  13. Should also be on your registration
  14. From what I have been told they are 100% full...I don't think transient slips are available at this time but call the booth/welcome center for specifics. I just repeating what I was told but you never know.
  15. Every day is different - some days they want the meat rigs - other days they want it clean. Tom Allen (Atommik) will ship if he has it in stock but last I saw he was sold out for the season.
  16. You say any kind of chop more than 1' coming from the side - what kind of boat are you running? If it's a light boat I guess I could see that happening if you are really sliding.
  17. It's open - still construction going on but open and operational.
  18. You are crabbed out - it's not the boards. Double Keel Otters will do the same.
  19. We found a fair number of smaller BTs yesterday too that we were able to quickly unhook in the net and they swam away strong - not sure where those fish were in April but it was good to see them.
  20. Going to get about 5 different answers LOL! Most popular brands in 30# 7 strand stainless wire are Torpedo, Blood Run, AFW, Malin, and Mason. A few other brands as well. They all do what they are supposed to do.
  21. Stinger now is making their own blades as they were acquired by Gibbs Delta. The older one were painted on Protroll echip blades. The newer stinger blades are identical to the protrolls with the exception that they don't have an e-chip.
  22. Team Angling Addict is looking for an observer for Atommik Invitational - need to be available for the captain's meeting evening of August 6th (Friday) as well as be available to observe on August 7th (Saturday) with the blow off day slated for August 8th (if needed). We fish a 33' Tiara so you will be observing on another large boat - Tom does observer swap based on boat size nominally. Paid position - we pay $100 for the day of the event and also invite you to fish with us on Friday as we pre-fish. (You will get exposure to our program as well as the boat you observe on over the course of 2 days). Please respond by PM if interested. The only thing you need to be is 100% reliable.
  23. Any time you try and optimize for multiple species, across multiple depths, with multiple presentations - you end up marginalizing pretty much everything. My advice is to pick something and fish it - Kings may be deeper and steelhead up high but you can have current moving in two different directions above and below the break and so how do you deal with that? Well you don't. You end up favoring one presentation over the other and some of your rods will likely go dead in the process. Most boats run one temp probe so unless they are moving it up and down a lot - they won't have awareness throughout the entire column. My advice is to pick one species to target and go all in. Its far easier to dial a spread for one species than it is to haphazardly toss a bunch of stuff out and hope for the best. When we fish - we fish a single species - not saying there aren't incidental catches but when we fish Browns or Kings - that's what we are fishing for and expect to catch.
  24. Nice job in the challenge - always some tough teams in these east end events! Fishing is a grind right now for sure! We fished browns exclusively for the challenge on Saturday - definitely some banger browns around. Glad you guys got a nice one out there on Sunday!
  • Create New...