Jump to content

jerryriggin

Members
  • Posts

    90
  • Joined

  • Last visited

Everything posted by jerryriggin

  1. You do know the older depth raiders had no calibration right? The fish hawk is calibrated.Sent from my SAMSUNG-SM-N910A using Lake Ontario United mobile app
  2. Flasher and fly. He was running it off a rigger. Sent from my SAMSUNG-SM-N910A using Lake Ontario United mobile app
  3. Depends which probe u have. Depth raider 1.8-2.2 mph fish hawk 2.4-2.7. This is for flasher Flys and meat cashed alot of checks running these speeds Sent from my SAMSUNG-SM-N910A using Lake Ontario United mobile app
  4. this do not do. Get yourself a 1000 ft spool of .015 wire and wind it on the reel. You do not want splices all over in your dipseys wire.Sent from my SAMSUNG-SM-N910A using Lake Ontario United mobile app
  5. Big Weenie shut the website down for the summer it will reopen later in the year. Sent from my SAMSUNG-SM-N910A using Lake Ontario United mobile app
  6. Simplest way to a full reel. Start with 2 of the same reels put wire first then mono till full then crank mono and wire on to the empty reel. Take a note of where the mono ends and wire begins on the second reel. Also doing it this way u put the wire on under drag so it is nice and tight and ready to fish when u get to the lake. Sent from my SAMSUNG-SM-N910A using Lake Ontario United mobile app
  7. Penn 309 will hold more then enough wire and backer. 1000 ft of .015 wire fills a diawa 47lc just right and a 309 has much more capacity then the 47lc. Regular dipseys rod will work fine just change the tip to a twilli tip. Sent from my SAMSUNG-SM-N910A using Lake Ontario United mobile app
  8. Protroll and michigan stinger blades are one in the same. It is just stinger has hundreds of different colors. There are no echips on the LJ or dreamweaver paddles but they both poduce fish. Sent from my SAMSUNG-SM-N910A using Lake Ontario United mobile app
  9. Think about it this way. The fish is attacking an 8 inch piece of plastic with a fly attached to it 22 inches behind with 40 or 50 lb. There is no need for a lighter leader to the flasher Sent from my SAMSUNG-SM-N910A using Lake Ontario United mobile app
  10. Tie to the mainline. Sent from my SAMSUNG-SM-N910A using Lake Ontario United mobile app
  11. Wrap a wet towel on the antenna and see if it works deeper Sent from my SAMSUNG-SM-N910A using Lake Ontario United mobile app
  12. I run 2 124mm walker deeper divers per side. The low is set on 1.5 and the hi is set on 3 but I swap out the weight of the high with a 107 mm diver. Sent from my SAMSUNG-SM-N910A using Lake Ontario United mobile app
  13. Nice fish and video. U need a bungee cord to hook on that steering wheel. LOL Sent from my SAMSUNG-SM-N910A using Lake Ontario United mobile app
  14. No lead core for dipseys. Lead is ran off either in line boards or big boards. Ss wire is for dipseys it will cut through the fleas. Copper is for running the same as lead core it just goes deeper and yes it will take a larger bulky reel. Sent from my SAMSUNG-SM-N910A using Lake Ontario United mobile app
  15. I would say drop back steelhead that failed to spawn in the river this spring. Sent from my SAMSUNG-SM-N910A using Lake Ontario United mobile app
×
×
  • Create New...