Jump to content

sherman brown

Members
  • Posts

    1,045
  • Joined

  • Last visited

Everything posted by sherman brown

  1. i just use a uni to uni knot for connecting all my lines, never had one fail. if you don't know how to tie a uni to uni go to youtube or just google it. a crimp could and probably would weaken your line. the only time i've seen a crimp was where heavy line was used that wasn't practical to tie a knot.
  2. you can contact cannon and ask them. i was using 13# on my big jon's and the breaker would kick out at times. called big jon and he said they was rated at 12#. but send it in for repair that it shouldn't be having a problem with 13#. but i switched to 12# and it hasn't happened again. i would say you wont have a problem at all with 12#. probably rated at least 15# anyway.
  3. 6 mph is idling way to fast. i would try idling it down to about 3.5 then try the bags. i have a 21' glass boat with a 350 mercruiser. idling at 650 rpm's runs me at 3.0 mph. what rpms are you idling?
  4. beckman make a wide assortment of nets.
  5. i used the 107 for awhile and liked them much better than a dipsy. but now i use the lite bite slide diver rigged like a dipsy. the lite bite is great for smaller fish on Erie.
  6. i've got a 17p high 5 that should work beautiful for you. it takes the flo torq hub kit. its in great shape. 225.00 shipped to your door. better hole shot, better lift, more boat control, than any 3 blade prop. message me if your interested.
  7. Beckman all the way for a great salmon net. we went up to Manistee last fall without a net. found the Beckman in a bait shop in Ludington mi. it was like 139.00 in the bait shop but well worth the money.
  8. i walleye fish Erie and use convector reels on my riggers.
  9. i recommend the 5225 xt for all your radio needs. a good antenna isn't a must but you'll never regret going to the 5225 xt. i'm using a step up now. i opted for the 5399 which is a 9'6" 2 piece antenna. the higher the antenna the better it works.
  10. go as heavy as the rigger is rated for. unless its rated for 20# or something. i like 13# pancake weights for my big jons. i would go no lighter than 12# as long as my rigger was rated that heavy. you can get good buys off ebay.
  11. a good used big jon rigger with swivel base is well worth 150.00. just the swivel base new will cost close to 150.00 each.
  12. i'll take the other 2 swivel bases. need them shipped at my cost. can do pay pal or check. pm me with instructions.
  13. i've had tires cup on trailer tires as well as auto tires over the yrs. each time i had them replaced i made sure they were balanced. it cured the problem each time. so many people dont think they need balanced. so it doesnt get done. and by the time its noticed its usually to late. i check my hubs every time i stop to see if they are running hot. while i'm there i also check the tires for heat and look for any problems with the tire.
  14. you are definitely doing something wrong. i run 2 riggers with 6 dipsies and never get tangled in the riggers. i only run 25' leads on my riggers. then i run my divers set on 3 in the front set on 2 in the middle set on 1 in the back. but if you put one out on the right thats set for left it will cross the lines, i have done this a few times when we had a fire drill back when i 1st started using divers. i have now switched to the lite bite slide divers set on 1.5 in the back 3.0 in the middle then 4.5 in the front. i also use daiwa sg17lca reels on the left side of the boat. and i use daiwa sg17lc3b reels on the right side to keep from putting them out on the wrong side.
  15. sherman brown

    Sold / Closed 86 Imperial VC230

    if you remove all gear, fish finder, riggers, planer reels, fish hawk, rod holders but leave the tracks, what would your price be fot the boat and trailer?
  16. i went to the electronic flares 2 yrs ago. just remember to install new batteries each spring.
  17. make sure and have your new tires balanced. an unbalanced tire will bounce causing it to have cups in the tire. i'm not saying its your problem but it sure as heck could be.
  18. i had 13" tires on my trailer. every time i got on the interstate i would have 1 if not 2 flats. i raised my fenders and went to 14" and havent had a flat in over 3 yrs. if the tires are wearing even try going to a larger size tire.
  19. yeah the only safe way to mount them on tracks is to bolt the tracks on with backing plates or at least fender washers. i have run riggers on my tracks one time. but i tied the riggers to the boat.
  20. the wilderness trolling rods in 8' or longer in med or m/h at fishusa.com is all you need, only 19.99 each. these are fiberglass rods that will last for yrs trolling. i always liked fiberglass best for trolling.
  21. the wilderness trolling rods from fishusa.com for only 19.99 each in 8' medium will work great for all the things you want to do. the fiberglass rods are made for trolling. they look good and will last for years.
  22. I just mounted my 24" tracks with standard ss screws. then I put 2 of the holders down then lifted my 250#'s and bounced around. and i've been using then with the cannon ratcheting holders using 3 dipsy style divers on each side for the last 8 yrs on erie. i've caught lots of 8# to 10# eyes and numerous steelhead and they are as tight as the day I installed them. but a metal boat wouldnt hold like my glass boat. I wouldnt mount them without backing plates on a metal boat.
  23. other than tearing the foam out the way I have mine mounted is with ss screws. but i've only used riggers for 2 weeks once with 3' booms with 12# weights. i've been running 3 0f the large lite bite slide divers on each side with cannon ratcheting rod holders. when I mounted mine I put 2 holders in the down position and lifted myself up and bounced around just to make sure they were going to hold. I weigh 250# and couldn't pull them loose. if you can get to any of the backs of the holes use ss bolts with large fender washers for backing. if you use ss screws drill your holes so the screws are tight going in. but not so tight the screw twists in two.
  24. i'll have to give them a try and see how they do for me as I bought 4 packs for practice and 2 more for the hunt. now I need the deer to cooperate, lol. good luck and good hunting gambler.
  25. I haven't tried these bullets on game yet. but they are wicked looking and shooting at targets.
×
×
  • Create New...