sszoldra

Unfortunately I'm getting a little too old to be going out on my own anymore, and if you've been fishing Oswego, I know you probably have seen this boat. I've always had guys drooling over it, and now I guess it's time to let it go It's 21' with a 90 HP Honda 4 stroke, and a 9.9 Honda 4 stroke kicker. Both motors have E-start and power tilt with forward controls and are both connected for steering. This boat was built by Willie for me, and delivered in August of 2009 with a lifetime warranty on the hull, and the motors have always been serviced by 1 Dealer, Columbia Marine in Columbia, Ct. I have all the receipts, and you can call them and ask about the boat. I am a fanatic about the maintenance and if anything was recommended by the dealer, it was done. It's all welded with 3/16" Aluminum on the sides and 1/4" on the bottom and has 3 color paint. Full canvas enclosure, and a removable addition to the top that covers the entire back of the boat. This boat has plenty of room to fish in back as there is a bench seat mounted on the passenger side in the rear even with a extra large cooler I have opposite. It's at K&G campgrounds now and I haven't started it or put it in the water yet this year. I have no doubt the motors will fire the second I hit the key. The motors are both still winterized since last year, but I did put in 25 gal. of new fuel. At the end of every season all the fuel remaining was always pumped out. I also have the build pictures of this boat to show what a tank it really is. All the rods, reels, boxes and boxes of flies, lures, divers are included. I'll bet there's close to $3K in tackle. All the jackets and safety equipment, nets and anchor. This is a turn key boat. It was just Coast Guard Aux. inspected, and a 2019 season launch pass to Wright's landing is mounted on the glass .If you ever wanted to get in a boat and fish, this is the one. I have some old pics of when it was getting ready to ship to me, so I'll add current pics when I get up to Oswego. Price is $30,000.00 More options Raymarine Autopilot Cobra Chart Plotter Lowrance Fish Finder Fishawk X4D ControllKing for the kicker 2 Scotty Downriggers 2 Cannon Rod Holders with hardware that allows them to be mounted in the tracks incorporated in the boat on the sides or the back Mooring Cover Front Fish Box 2 batteries with on board charger 40 gal. under floor fuel tank with separate lines for each motor (always non-Ethanol fuel used) Heavy duty Baker bunk trailer /w Power Winch

I have a Coachman Class C RV for sale. It's on a 98 Ford chassis with 50K miles on it. It's on a K&G Lodge site that's paid for the year. (lot rent is $1950) I live in Ct, so I always drove it home in the fall and back up for the spring. It's 31' and sleeps 4 or 5. Everything works including the generator. I'll have to add pics or can show it when I get up. The photo attached is a stock photo, it's pretty much identical to mine.

It's real. 100 K and you can be a charter capt.

I always drain my on board tank with an electric fuel pump, the kind they put on the old hot rods. connect the in line to the out line of the tank before the filter, tilt the boat up and you'll get it all out. I learned that lesson when I dropped $1200 to rebuild 4 carbs with your same problem, and the dealer did that, and also took out the fuel sender and got in the tank for the rest of it. I also used the additives every time I put gas in and can say positively they don't work. I've put in nothing but E-free gas since.

Just wondering what the flex seal does to the weights. Thank you.

The best customer service of any company I've dealt with.

The xx's normally go on a sailboat

ttt

I also have that pilot and it works well, but there's a procedure to run when it's 1st installed, and it won't run right if it didn't run all the way thru. I forget what it's called but I do remember having a tech from Raymarine on the phone while I was running it thru. Don't be afraid to call and ask the techs' there to help you, they are really good and helpful.

X3

WOW!!!!!!!!

Still for sale

Make your own. They are easy to make. Get an assortment of meat heads, my favorite 2 are the clear UV and the white glow.

TTT

GoPro Hero 5 Black w/voice control, 2 batteries & charger, remote voice control for windy days, (you wear it) case, cables, and a sack full of every GoPro mount known to man with tripods,extensions and extra bases and screws. $300 shipped.

Or you can make them yourself. These guys show you how and sell the material. https://www.purpletacoflysupply.com/videos/

SOLD