For Sale : USA ISO older cannon mag 10 part

[bandrus1]

so while moving my boat today my rigger hit the wall breaking the plastic piece at the end of the boom that holds the pully

 

I believe it slides down the boom and there is a screw that holds it in

 

anybody have one?

[bandrus1]

I think this is the piece

 

http://www.fish307.com/cannon-downrigger-part-2227820-boom-end-telescopic/

[LakerTaker]

While you are replacing it you may want to upgrade to the newest pulley design - they are better. You will need to verify that the new pulley will fit your boom.

Edited October 31, 2015 by LakerTaker

[bandrus1]

While you are replacing it you may want to upgrade to the newest pulley design - they are better.

I'm not all to familiar with the components to these.. Can ya give me a quick guide?

[LakerTaker]

For the new pulley design you need a boom end adapter kit 3880220 and the new swivel head 3770200. Angling Outpost has them. As well as fish307.com. Might be more $ than you'd like to spend but it is worth it in my opinion. They also have what you need if you are only replacing.

[Sk8man]

I think what Laker Taker is referring to is that there have been a couple of design changes along the way with the end pulley and there have been problems recently on newer Mag downriggers that have been corrected by the newest end pulley but you need to check to see if it will fit the older Mag 10 or you may (probably) need the older one. The one only partly pictured has worked on mine for many years with the only problem being that the downrigger release may try to slide up into the pulley shroud itself when wound too tight but nothing major. There are exploded diagrams of the downrigger parts right in that same section where your pic came from. I'd either email or give the guys at Fish307 a call and ask if the new one will fit....they are good folks and knowledgeable.

[bandrus1]

Thanks so much guy

Soif I choose to not upgrade the piece in the link I posted is the correct part right? I havnt had any issues with the rigger so o don't know if I want to get into changing it

[bandrus1]

I took these pics

[LakerTaker]

Yes, the piece you posted should work.

[Sk8man]

Yep

[bandrus1]

Thank guys you were a great help

At $6 I'll order 2!!!

[Sk8man]

http://www.fish307.com/cannon-downrigger-part-2227820-boom-end-telescopic/

 

http://www.fish307.com/cannon-downrigger-part-3770135-swivel-head-assembly/

 

You didn't say which boom but if it is the telescoping one like the ones I have these are the parts for it

[bandrus1]

I should in theory still be able to use my pull from the old system right

[bandrus1]

Mine are fixed non telescoping

[Sk8man]

Yes if it isn't cracked etc. and I believe that all Mag 10 booms take the  part I noted above they are "standard" for the Mag 10

[bandrus1]

Thanks