rolmops

Bill Mayer of Mayer's marina at the Irondeqoit bay outlet has about 50 of those '57 and up 35 horse covers.He will happily sell you a used one with advice as to how to remove the old one without busting the bolts.By the looks of it yours is a 59.I am not sure that the 40 horse sixties engines had those but I do not think so Don't panick,These old fifties engines are tough and Bill has all the gaskets. the part is called "the outer compression release chamber" it is part#306280 the gasket underneath is part #304726. these are 1959 part numbers for 35 horse engines and may have been superseded. Ask bill if you can use a head and then check compression.You may want to buy a complete head and not just the blown part.

This morning it said in the D&C that the park and the launch will be run by the county and stay open. It seems that the state and the county had put all the pieces in place for this transfer in the past few weeks.

Fishing Report Your Name / Boat Name: ============== TRIP OVERVIEW ============== Date(s):5/16 Time on Water:07.30/12.00 Weather/Temp:low sixties Wind Speed/Direction:first west,later north west to north/north west Waves: about a foot,sometimes a bit higher Surface Temp: 48 Location:ship builders LAT/LONG (GPS Cords): =============== FISHING RESULTS =============== Total Hits: 0 Total Boated:0 Species Breakdown: Hot Lure: everything was ice cold Trolling Speed: 1.9 to 3 Down Speed: Boat Depth: from 15 to 100 fow Lure Depth: all over Just a very nice day with very lousy fishing. There were about six boats out going towards Webster and back to I-bay. Only one guy caught a nice Coho and it was not me. One of the fishermen went into I-bay and caught a boat which he towed into Mayer's Marina. ==================== SUMMARY & FURTHER DETAILS ====================

Yes it sucks.But being in debt to the tune of 9 billion dollars sucks even more. In my house when money is tight, the luxuries like dining out and fishing,yes fishing, are scaled back first,the same goes for NY state. It hurts to close some parks,but it is not wrong given the circumstances. Now if the Governor could save some serious money in other places AND help us to throw out most, if not all incumbents,I would be satisfied.

Pugsly in Webster will sell you a boat and so will Bryce marine,although some would rather not buy from him..... If you can find a Grady White for sale, go for it,they are on par with Boston Whalers

Don't worry,it runs hotter because of the thermostat.As long as you can keep your hand on it for a reasonable time you are fine. In fact when you run a bit hotter you will have better fuel economy.

Just yesterday evening,leafing through a bunch of web pages I came upon this salmon lure tackle box.It seems to solve the large lure storage problem.Did any of you try it ?Or do you have something better? Anyway here it is: www.jacksonlures.com/Commerce2/Mate.htm please tell me what you think,thanks Cornelis.

I inherited a Victrola box with a Seth Green set up,but I use my Penn Sabre with a Penn Senator 113 mostly when I try to use a Seth Green.It is hard work and sometimes it feels like professional fishing and not fishing for fun.

The only problem in that statement is that there are people involved. It happens all the time that dealers will sell you ill fitting set ups because their profit goes up.

If you want good info and tires that are cheaper than anywhere else go to: http://www.kmtparts.com With that weight, I would go with a "D" load range which is 8 ply. Give them a call and they will advise you on the tires that you need. They send them by UPS. I bought my tires from them and it cost about half the price of anywhere else. You do have to mount them yourself

Great info,thank you. Too bad we can't go out tomorrow.

The 2 top ones are temperature and speed at the surface,the 2 bottom ones are temperature and speed at the ball.

Make sure that you get a VHF that you can hook up to your GPS and that allows you to get an emergency MMSI number.There should be a button on the radio that will broadcasts a MAYDAY , your GPS position and your MMSI the moment you push that button.This will inform the coast guard where you are and who you are.They will be able to contact your family with the info they get from your MMSI number.

I'm just wondering what it is that they do. Do these storms mix the different water layers and bring more fish closer to shore or do they do the opposite? Any insights would be greatly appreciated. Rolmops.

I bought my X-4 for $549 from the net,but the suggested retail price is around $620

Most boats produced these days are ready for use in salt water.I/Os and salt water do not like each other at all.The only way to use an I/O in salt water is by adding a heat exchanger preferably in the hull so the salt does not get in the engine cooling ducts. Outboards are much more salt tolerant and can be very easily cleaned. Most companies will therefore sell boats with outboards.

In case all else fails. You can get a $40 Shakespeare that works just fine.

The wood duck looks like a hybrid. Mallards and wood ducks can and will interbreed. Google "wood duck mallard interbreed" and you will see the results.

I am not sure that adding the third rod will greatly improve my success.As a single boater,I have a hard time to keep 2 rods in the water and steering the boat at the same time. In order to set up a program I use a trick I learned tuna and blue fish fishing.I use an umbrella rig on a wire line.This gives me ten lures in the water with only one ,which looks wounded, with a treble hook business end. This enables the single fisherman to have a "complete program" and stay within the current laws. I like to think that I catch more fish that way. Just google "umbrella rig" to see what I mean.

I just bought a new X4 fish hawk and I am very impressed so far.The only thing that sort of bugs me is that there seems to be a few seconds delay between the signal being sent and the screen changing accordingly.

The rule of fist for an outboard when run at WOT (wide open throttle) is 10% of the horse power rating per hour.So one 200 HP engine will burn 20 gallon per hour at WOT. 2 200s will burn 40 gallons per hour,but running a second outboard will only give you an additional 30% push. My guess is that your I/O does a lot better than that. You may want to look into buying a 10 hp kicker with your I/O

I launched at Mayer's Marina on the Webster side of the outlet just last Saturday with my 19 footer.His ramp is a bit steeper and if you get stuck he has the gear to lift up the trailer from behind.(he sees it as his responsibility to get your trailer in and out without damage). I guess that the trick is rolling down fast and then braking hard so the boat continues by itself off the trailer.

Fishing Report Your Name / Boat Name: ============== TRIP OVERVIEW ============== Date(s):04-25 Time on Water:07.00-11.00 Weather/Temp:lousy/high forties Wind Speed/Direction:E.N.E. Waves: started out with 2 footers,towards 11.00 the wind picked up and the waves became 4 footers Surface Temp: 47/48 Location:in front of the Genny LAT/LONG (GPS Cords): =============== FISHING RESULTS =============== Total Hits: 3 Total Boated:2 Species Breakdown:coho/snagged big goby Hot Lure:dream weaver SS water melon Trolling Speed: 2.2/2.5 Down Speed: 2.2 Boat Depth: 9 to 22 fow Lure Depth: 5/10/14/17 ==================== SUMMARY & FURTHER DETAILS The morning started out very nice with light winds and light rain.Once we hit the Genny plume going west in front of the river, the screen lit up with lots of bait and lots of big fish between 8 and 20 fow.We threw stick baits at them from the planers and dream weavers from the down riggers.We started out with greens but later we changed over to reds.The red worked a bit better and in quick succession we had three hits.First a big fat snagged gobi and a bit later a nice Coho.The one that got away felt like another Coho. Today there were no diving birds and most of the bait was fairly deep down. Around 11.00 the wind picked up so we decided to go back to Ibay and got ourselves a good soaking from the waves coming in sideways. Having the new X4 speed and temperature probe is a mixed blessing. On the one hand it is a kick to have all that extra information, but at the same time I find myself worrying all the time about $250 hanging from a thin piece of wire...I'll have to get used to it ====================