Jump to content

Firechief48

Professional
  • Posts

    574
  • Joined

  • Last visited

Everything posted by Firechief48

  1. Todd I too have the older Cannons and I'm not telling you it will be ok but I run the 12lb torpedoes and knock on wood I haven't had a problem. I wouldn't go heavier though.
  2. In the past I ran the Moor Sub Troll. This year I'm staying with that and adding a Fish Hawk
  3. I have one mounted each side forward of where the cabin ends. Easy to reach from the back area and out of the way of my planer reels.
  4. Merry Christmas and Happy New Year
  5. Merry Christmas and a Happy New Year to everyone.
  6. I run my dipseys with Berts ratcheting. I do have an adjustable like rougarou mentioned for a chute Rod
  7. You're quite welcome and good luck to her. Someday I hope to see some of her work.
  8. As a former taxidermist I can tell you something like Harbor Freight is ok and will get the job done but there is no comparison to a Paasche for getting better detail and much smoother operation and it sounds like you have an artist that just might want that. Old saying, you get what you pay for. VanDykes is one of the bigger suppliers of taxidermy supplies and have a good selection.
  9. Mine would be green/green glow without a doubt
  10. These guys are 100% on when they say there is a lot of great info on here that guys share and will speed up the learning process. But I think the best advice is what Big Water shared about the lake. She can turn ugly in no time with little warning and is very unforgiving. Check the weather before heading out, keep a marine radio on and by all means if the USCG puts out an alert or a Captain running radar gives a report, listen to them and get in. Much better to quit unexpectedly and live to fish tomorrow than not at all. Good luck out there
  11. I also would recommend Troutman87. He's in Watkins Glen and makes 12 and 16 lb torpedoes. I have run 12lbs for a few years and love them.
  12. I don't know if it makes a difference or not but I've always left mine out just in case water/moisture was in there. As far as the mice if they want to get in there's other places they fit through also.
  13. Unless you have others not listed and I'm doing my math right it will cost $10 more to by them all together rather than $20 per lot.
  14. That should say rail slides. Ones with set screws.
  15. G-Daddy is right. I have pulleys, springs and a heavy rope clip from Lowes. I ordered rail sockets with molded eyes for Bimini top and slid over roof rails then attach rope clip through eye.
  16. Killian that would be Facebook. You can talk about anything and get great advice, everybody is an expert there and evidently most think they're either lawyers or physiologists.
  17. I would also install a check valve. Pump should have no problem as you don't have a lot of head pressure to pump against. I had the same problem with my house A/C condensate pump, I didn't realize when I cleaned it I dropped the rubber check valve, once installed again no problems. Sent from my iPhone using Lake Ontario United mobile app
  18. My dad had also taught me the nose trick or running the rod along the scalp/hair. To get it apart try grabbing each side of the connected parts like a fist with the fist behind the knees then squat slightly and spread your knees. Sent from my iPhone using Lake Ontario United mobile app
  19. It's a matter of personal preference, I have both styles and would much rather use the boot foot. Either way I put a set of corkers on my feet to keep from slipping. Sent from my iPhone using Lake Ontario United mobile app
  20. If you're looking to buy I think Sportsmans Guide has the best reasonable prices waders. Sometimes Cabelas has good sales also. Sent from my iPhone using Lake Ontario United mobile app
  21. Enclosed shelf on the stern with carpet to keep them from moving around. Sent from my iPhone using Lake Ontario United mobile app
×
×
  • Create New...