Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Cha-Sea

Professional
  • Content Count

    31
  • Joined

  • Last visited

Everything posted by Cha-Sea

  1. Thanks all. I’ll report a solution as soon as I have one. Going to start with a compression test. More to come... Sent from my iPhone using Lake Ontario United
  2. Wondering if anyone has had similar issues with overheating. I have a 1999 Mercruiser 7.4 MPI with a 160deg. thermostat. Normal operating temp. at higher RPM's has always held steady at 175deg. I noticed that when I was winterizing it in the fall, I wasn't seeing water flow out of the two ports at the gimbal housing the way it should. I replaced the raw water pump housing, impeller and wear plate after backflushing the system several times. Good water flow after that and finished winterization. Come spring, seemed good for the first couple short trips. Ran out to the nuke plant from I-Bay to fish and while I was motoring back, the temp climbed enough to set the alarm off and the engine compartment was full of white smoke. Didn't want to chance it so I got towed back. Belt looked fine and still not sure where the smoke came from. I noticed a small drip coming from water pump. Pulled it apart and it was already showing signs of wear. Replaced the impeller, wear plate and housing again. Now, any time I go over 3000RPM or so, the temp starts to climb above 175deg so I back off. I heard the shaft seals in the raw water pump could be sucking air. I replaced the "entire" pump assembly hoping to squash the problem. Better, but similar. Coupled a clear hose onto the input hose going into the thermostat manifold and I can see dime sized air bubbles passing through so I know it is drawing air in from somewhere, just can't chase it down. My current situation is that i can hold 3800RPM and it seems to hold a temp around 180deg.... as long as I get to 3800RPM very gradually. If I try to plane quickly, the temp climbs right up. All I can think is that the suction is collapsing a hose or something and is restricting the volume of water? With the clear hose attached and discharging into my fish box, it has a consistent flow of water but it does not increase proportionally when I increase the RPM as I expected it would. It actually looses pressure. I replaced all of the bellows and upgraded the water intake hose/hard plastic elbow in the Spring, new thermostat, pulled risers (both free and clear), pulled circ. pump (looks fine), completely new raw water pump, I backflushed the system multiple times and checked the screens in the oil coolers, all clear. I even brought my compressor down and pressure tested everything inside of the boat while spraying every connection with soapy water, nothing. While I had the compressor there, I blew out all of the lines including back through the outdrive in case there were any mussels or anything. Everything seems unrestricted. I still fish multiple times a week but with this restriction. Any words of wisdom are appreciated! Thanks, Dave
  3. How deep did you make it? Heading out of ibay in an hour or so. Sent from my iPhone using Lake Ontario United
  4. Thanks. I will take a look and see what type I have.
  5. Mine, and my buddies have never worked as advertised. Hit or miss at best and we have both gone through their tech dept. and sent videos of the screen. Follow the calibration process and it sometimes makes it more believable and sometimes not. Certainly haven’t gotten mine reliable yet unfortunately. Sent from my iPhone using Lake Ontario United
  6. I have the high speed Mag 10’s as well, wire is fine but on my third mount in two years. Snubber sounds like a good tip to dampen the shock load from a heavy ball. Sent from my iPhone using Lake Ontario United
  7. I use the exact ones and have been pretty happy but only running two. Sounds like good advice above. Tangles? I put the port dipsy rod in the starboard dipsy holder. Don’t do that. Lol. Mess Sent from my iPhone using Lake Ontario United
  8. Send them down head first. Usually wakes them up enough to get them to recover the majority of the time. Sent from my iPhone using Lake Ontario United
  9. Went out for a couple hours tonight out of IBay North to 160’ and held North heading. Hit one nice king in 220’ on rigger down 35’ and lost a shaker king at 230’ on a 3 color down the shoot. Spoons. Went to 280’ and turned around and trolled back to 200’ and called it a night. Good luck Sent from my iPhone using Lake Ontario United
  10. Seems like that has been the norm this week, blank screen but catching fish. This was cool to see but were lakers. Sent from my iPhone using Lake Ontario United
  11. I’m on year three at this big lake fishing after fishing for small lake fish my whole life. I finally have a well outfitted 28’ boat now and can consistently avoid the skunking but by no means able to compete with that video. If I can find active fish I usually have a good day. I need some knowledge on how the winds blow the water around, where the “warm water” comes from, trolling direction/speed best practices in currents and such if anyone wants to share. I’m out of I Bay. Went 9/10 on Saturday, 1/1 on Sunday and 2/2 today. Happy, sad,sad Sent from my iPhone using Lake Ontario United
  12. That’s amazing Sent from my iPhone using Lake Ontario United
  13. I got the big Bubba blade and it is flexible and makes a clean and consistent cut down the backbone right through the bones. Filets come out perfect. Just might need to sharpen more often than Cutco. The big blade let’s you get a good distance per swipe before taking another pass so you aren’t sawing through with a smaller blade. Sent from my iPhone using Lake Ontario United
  14. There are a lot of big Lakers out in 130 - 160' straight out of I-Bay and are pretty easy to catch using big flasher/flies, flasher/meat or cowbells/gambler rigs. I took my girlfriends son out a couple days ago for a couple hour salmon run after work and dropped the flasher meat down a few times to the Lakers to fill in the slower moments. Picked up one 12.3 and one 12.7. Both would have made the LOC board...for a short time. Threw them back because I didn't have enough time to go weigh them in. Good luck.
  15. Wish there was a better product. Mine has never worked right. Neither has my buddies. Very inconsistent. Sent from my iPhone using Lake Ontario United
  16. I have 400’ left on the spool and a new 1000’ spool. Both 32#. I’d sell either for whatever I paid. Think it was FishUSA. Sent from my iPhone using Lake Ontario United
  17. Thanks for the comments guys. Should be back in action soon. Good luck out there. Sent from my iPhone using Lake Ontario United
  18. Nice. Wondering if I needed to downsize my leaders. Might need to go for them today since some **** stole both of my downriggers a couple days ago. Sent from my iPhone using Lake Ontario United
  19. Just got to my boat at Bayview Marina on I Bay excited to fish tonight and took tomorrow off to fish as well. Found both downriggers stripped off of my mounts. Gone. Older Cannon Mag 10’s. Please let me know if you see anyone with newly acquired Mag 10’s. Had Scotty releases, one flat ball and one round ball. Definitely pony up a few hundred bucks if we find this idiot. Sent from my iPhone using Lake Ontario United mobile app
  20. Thanks. What speed are they liking? Sent from my iPhone using Lake Ontario United
  21. Thanks for the feedback. I’ll check it out. Sent from my iPhone using Lake Ontario United
  22. Hey guys. Where is the best place to find accurate lake forecasts? Took the day off today because they were calling for 2’ on my app and thought I’d get a break from the hot weather. Sucked out there with 5-6’. Only one other boat out there braving it with me. Sent from my iPhone using Lake Ontario United mobile app
  23. I just bought the outdrive from a guy who had a 2015 boat that had a cabin fire. It was coupled to a 5.7mpi with 74 hours on it. Check it out on eBay. His name is Pat Kessler out of WV. Listed for $3500 but he said he'd sell it to me for $2500 and include a bunch of other stuff. His number is 304-719-2657. Honest guy to work with. Sent from my iPhone using Lake Ontario United
  24. Thanks. I was as well. Give it another shot tomorrow. Sent from my iPhone using Lake Ontario United
  25. Nice catch! Went out Wednesday for 5 hours and couldn't buy a fish. Lot of followers but no takers. How fast were you trolling? Sent from my iPhone using Lake Ontario United
×
×
  • Create New...