Sold / Closed Tru Trac or similar 10-12lb pancake weights

[1lastweekend]

Looking for a couple of downrigger weights like the one pictured, don't have to be Tru-Trac brand, but need to be 10-12 lbs and local to Rochester/Monroe County...Dont want to think about what shipping would be on these!

 

Thanks

Edited May 21, 2019 by 1lastweekend

[1lastweekend]

TTT

[bottom-feeder]

got a pair in the boat I bought but you gotta come to pulaski to get em

[1lastweekend]

  On 5/15/2019 at 9:05 AM, bottom-feeder said:

got a pair in the boat I bought but you gotta come to pulaski to get em

Expand  

Thanks, got any pics of them?  How much are you asking for them?

 

Mike

[bottom-feeder]

I'll get pic after work

Sent from my Z971 using Lake Ontario United mobile app

[sherman brown]

they can be shipped in a usps priority box for around 15.00 flat rate up to 70 lbs. I shipped 50 lbs of lead to a guy last yr but don't remember just what it cost. the flat box will hold both weights. if you don't find what you want here look on ebay. they are only around 70.00 for 2 of them.

[1lastweekend]

  On 5/15/2019 at 1:44 PM, sherman brown said:

they can be shipped in a usps priority box for around 15.00 flat rate up to 70 lbs. I shipped 50 lbs of lead to a guy last yr but don't remember just what it cost. the flat box will hold both weights. if you don't find what you want here look on ebay. they are only around 70.00 for 2 of them.

Expand  

Thanks I will check out Ebay too..

[Fishnut]

What is the diameter and thickness of the weights you have? I’m considering making a mold for some finned pancake weights but I don’t have any to copy so I’d just be guessing at what they will weigh when I’m done.


Sent from my iPhone using Lake Ontario United mobile app

[bottom-feeder]

Rubber coated.....guessing 12lbs....want em come an get em.....I'll never use em

Sent from my Z971 using Lake Ontario United mobile app

[1lastweekend]

  On 5/15/2019 at 9:16 PM, Fishnut said:

What is the diameter and thickness of the weights you have? I’m considering making a mold for some finned pancake weights but I don’t have any to copy so I’d just be guessing at what they will weigh when I’m done.


Sent from my iPhone using Lake Ontario United mobile app

Expand  

I will get you some dimensions from the one I have tonight and post it.  The Tru-Trac that I have shown is a 10 pounder...

[1lastweekend]

  On 5/15/2019 at 9:33 PM, bottom-feeder said:

Rubber coated.....guessing 12lbs....want em come an get em.....I'll never use em

Sent from my Z971 using Lake Ontario United mobile app
 

Expand  

Thanks, I will try to figure out an excuse to get up there LOL...Maybe to buy some stuff at Fat Nancy's....

 

I would be more than willing to pay shipping and for your time and trouble to ship if you would be open to that, just let me know. I live just outside of Rochester.

[Fishnut]

  On 5/16/2019 at 10:52 AM, 1lastweekend said:

I will get you some dimensions from the one I have tonight and post it.  The Tru-Trac that I have shown is a 10 pounder...

Thank you.


Sent from my iPhone using Lake Ontario United mobile app

[1lastweekend]

  On 5/16/2019 at 2:35 PM, Fishnut said:

  On 5/16/2019 at 6:52 AM, 1lastweekend said:

I will get you some dimensions from the one I have tonight and post it.  The Tru-Trac that I have shown is a 10 pounder...

Expand  

  On 5/16/2019 at 2:35 PM, Fishnut said:

Thank you.


Sent from my iPhone using Lake Ontario United mobile app

Expand  

Ok the overall length is 11", with the fin 6" and the lead pancake 5" in diameter.  The pancake is 2" wide in the center and tapers to 5/8" at the edges.  Hope this helps

 

[Fishnut]

  On 5/17/2019 at 9:36 PM, 1lastweekend said:

Ok the overall length is 11", with the fin 6" and the lead pancake 5" in diameter.  The pancake is 2" wide in the center and tapers to 5/8" at the edges.  Hope this helps
 

. Thank you very much.


Sent from my iPhone using Lake Ontario United mobile app