Shakemsam

Columbus Day week is my annual trip up for perch fishing and I don't remember it this slow. Generally my main stay is a drift between Peos and Dodge Bay's. Still the most productive for me but only a result in about 20 eaters in the past 5 days. Even made a run to the breakwall at the Cape, with not even a bite! Also drifted Carlton and Linda with same result. Still...I wouldn't be anywhere else this week. You folks up here are so blessed!

It's all about LM and Pike.

The only reason to ever turn in plates was to have a receipt to show your insurance agent that the vehicle was not on the road. no need with a trailer.

They won't draw power when not in use.

Take beer!

No personal experience with OMC I/O's. But I believe the general consensus was stay away if you can. Parts are pricier and harder to find than merc. The Cobra's were a better outdrive than previous versions but still not merc. An outboard bracket would be an interesting project. Since you are rebuilding the transom anyway, that's the direction I would go.

Thanks Tyee for the reply. It seemed to always happen when bringing in the outside diver, which is really odd because there was a 30 ft difference between depth, with the outside running in the top 30. The outside rods were divers and spoons while the insides had flasher and flys. Always on the Starboard side, regardless of speed or direction. I wonder about maybe after popping the diver on the retrieve, letting out some line bring it closer to the surface and then bringing them up the middle, like I do with boards....

I generally run Chinook #5's set at 1.5 on wire and #3's on braid set at 4, for my spread. Due to a loss of a #5 earlier this year and none being available, this weekend..I resorted to a #4 on the inside with a #2 on the outside. It didn't take long before they got together. No matter what I did, there was no way of keeping them apart. The wire divers are 7' rods up and out at 45 degrees while the braid is 9' at a flat 90 degree. Any ideas?

I believe Yam recommends 87 for the the newer 250. I would drain the bowls and change the filters, top it off with eth free and add some stabill or lucas. Run and repeat!

Running a MG Xi5 with a Yam 9.9 on a 19' Sea Nymph. Works fine as an AP on anything less than a 2' chop. above that and it's tough. Shaft length on the bow is really important. mine is 60" and 72" would be better.

I know of Browns being caught in the ABay area.