Jump to content

srd

Professional
 View Profile  See their activity

  • Posts

    138

  • Joined

  • Last visited

 Content Type 

Everything posted by srd

  1. srd
    Usually the last weekend of July.
  2. srd

    web site

    srd replied to chasen's topic in Open Lake Discussion

    No problem here and my comp. is almost as old as me.
  3. srd
    You want it nice and tight. What I did was use a long screwdriver. I put it through a tennis ball then put on the spool and then another tennis ball then clamped it in a vise.
  4. srd
    Not sure about a 8hp but my 25 had a clip top side under the motor where it comes through the case.
  5. srd
    Second on the autotether
  6. srd
    pm sent
  7. srd
    I run two of the same reels with a 1000' and fills the reel with no backing.
  8. srd
    Sea Nymph was bought by Lowe. Maybe try them and see if they can help you.
  9. srd
    Sorry I did have it here.
  10. srd
    Sorry I can't. It's on my boat and that's 4hrs. away. Works great and floats if you drop it lol. I'll try and draw apic. if you like.
  11. srd
    I attached the protractor to the square pc. of wood and used a cotter pin as the pendulum. Align the left or right edge of wood with the cable and pendulum will tell you the angle
  12. srd
    You have the chart above. Easy to make one. Square pc. of wood with a protractor attached. Put a pendulum at the top. Align the edge of the wood with the cable and the pendulum will give you the angle.
  13. srd
    Have mine for 20yrs. now and no problems yet.
  14. srd
    Howie Green Krink. was my best.
  15. srd
    2nd the soft scrub
  16. srd
    Sodus Inn and Turtle cove. State Park closed.
  17. srd
    I got one you can have but won't be up to Fair Haven till the end of July.
  18. srd

    12 sea King

    srd replied to rbonnell1's topic in This Old Boat

    Mine is rated for a 10hp.
  19. srd
    try squeezing a little in a pair of channel lock pliers to make it just a little out of round. Don't over do it just a little.
  20. srd
    Hear that. Going new all the way with mine. Never again for me that's for sure.
  21. srd
    Going through that now. Bought a salt water boat with only 600hrs. State of the art flushing system. Now replacing the motor in whole from internal rust. I'd never do it again. Just my opinion.
  22. srd
    Keep dancing naked Patriot it scares the fish up to our end of the lake
  23. srd
    Flip flops or bare foot here
  24. srd
    For sale 600w Xtreme bilge heater. Factory calibrated to turn on when temperature falls below 40 and turn off when ambient temperature of 52 has been attained. Purchased new 11/22/08 for $ 430 and never used. Will sell for $250 obo plus shipping. Original box, receipt and paper work included.
  25. srd
    Are any of your chips The Navionics gold XL9 part number SD/16XG-2?
×
×
  • Create New...