Jump to content

Diversion

Members
  • Posts

    672
  • Joined

  • Last visited

Everything posted by Diversion

  1. Got these on my land in Alleghany county
  2. What resolution do you have that set on? Low Med or High? Just curious.
  3. Great pics Rich I agree, I hope the fish stay in the lake for at least a few more weeks
  4. Check the solenoids in the back on the trim pump, there are 2 of them. 1 has a blue wire to it, the other has a green wire to it. Unbolt them, 2 bolts, and clean off the brass connection points, then reinstall. If that doesn't work, either one of them is shot, or it is a wiring issue on the outdrive where the trim sensors are. These have black wire running to them, they are located on the sides, near the top of the outdrive.
  5. Not that I know of, the southern zone where I am, Alleghany County, bow season opens Oct 18th this year. Those trucks you saw were probably doing what I was, just some preseason work and scouting. I saw a ton of ATVs on trailers both heading to and from camp, most likely because of the holiday weekend.
  6. SW, I believe that I passed you on the 190 when you were heading south, back to PA. I was heading north back from my deer camp. Sounds like you guys had a good time.
  7. Black or Dark Purple
  8. Capt Carl, On your Carbon 14, do you run a lazer ladder or is that a glow ladder on the front? Saw a pic of it with a big king on the oak site. Thanks
  9. NICE What model Penn Yan is that?
  10. Niagara Bar / Olcott
  11. Hey Billy, I had that happen to me 2 years ago on my PY, that little in-line fuse down by the engine on I think an orange wire. I was running in and all my stuff went dead, except the motor. Was pretty strange, but a simple fix.
  12. Fished North East of the Red Can in 200 - 250 FOW and had 54 degree water down 45 feet. SpinDoctors/Flys in Chrome Green/TG took Kings on the wire divers and probe rigger at 55 feet. Had a real screemer on the wire and then bang, wire broke, must have been a kink in there somewhere. Bye bye diver/spinny/fly An old Northport Nailer took a nice steelie off the rigger at 65 feet. North wind created some pretty neat waves to work with.
  13. Sounds good, looks like Team Fishstyx will be Team Diversion this year, just gotta get all the ducks in a row.
  14. Richard, they are all yours, they just don't work for me. I think we are doing the FHC, so I'll get them to you then.
  15. I got 2 ya can have, the original Fishlanders that you are looking for, seeing how I cannot get them to fire. That is if you are interested in them
  16. When my boat had problems last summer, my mechanic told me that a coupler fails for one of two reasons, either excessive run time so its just worn out, or somthing is out of alignment. The alignment thing was what got me, resulting in the coupler failure. When you pull your motor, have the motor mounts, engine beds and stringers looked at carefully before you make any decisions, as the underlying factors that made your coupler fail need to be fixed as well, or your next coupler will fail again.
  17. Nothing on the DEW?????
  18. Tom, What GPS unit is it? Thanks
  19. Nice pics, good to meet you in person.
  20. http://www.michiganangler.com/Trolling_Bags.htm Been using the same pair for the past 3 seasons, have held up very well, still look like new.
  21. Here is the pic of the big steelie Tim mentioned This is another that was released
  22. Sweet pics, its amazing how much nicer the weather and water was for you, just one day later.
×
×
  • Create New...