AnglingAddict

Katlynn Marine in Sodus is a Yanmar dealer - that's going to be your nearest option.

Beefy Bags all the way - Had one come apart this year but had a few years and a bunch of time on it - 5-6 footers and running 1200 RPMs to get the control/speed we needed to get bit in that direction. Wasn't a catastrophic failure - will have it re-sewn this off-season. I don't think there really is anything better out there.

You get what you pay for - lot of cheap choices that don't work well. Original Boga grip by Estaboga tackle - yeah they cost a lot - on year 13 or so with mine. Durable, fairly accurate scale, and I think less damaging to fish jaws as you don't clamp them down to hold the fish.... https://bogagrip.com/

Hey Greg - Michigan Motorz looks to have some long blocks.... Ford 5.0L (302 ci) Marine Engine (michiganmotorz.com)

Except its generally my wife and kid and maybe a buddy - so probably doesn't need to be in writing in our situation....BUT for people who aren't related or the best of friends yes...absolutely. That being said my kid has tried some creative math at times

Everyone on the boat should be in agreement as to how things are split before you even put a line in the water.... On our boat it's pretty simple - generally speaking we deduct expenses, cost of entry, etc. Once those things are covered then we go about the split. On our boat we then split equally amongst participants and the boat takes a share to cover other wear and tear items or things like lost gear, kinked wire, etc. My 13 year old in integral to our team and he gets a full share....he earns it. One of the bigger expense items can be fuel - I know this year in one tournament we pre-fished one day with tourney the next and we ran 52 gallons through the day we pre-fished and another 73 gallons on game day. Make sure if that could come into play that you are transparent there. If a W2 is involved the person who ends up paying the taxes on the entire amount has 30% of the winnings up front to go to cover the tax liability. Anything under a few hundred bucks we typically don't bother with.... As far as a court case it would probably cost more to take it to court than you would ever get back....better to just walk away.

A-Tom-Mik Invitational this weekend and 1K a days between now and then - will be a little more traffic than typical out of Oswego through this weekend.

agree - its do-able but parking is limited and that weekend no trailer parking in the lot - there is a typically a lot for boat trailers some distance away if you are set on fishing out of Oswego. If it was me I would avoid Oswego this coming weekend....

Certain times of the year mono or braid divers can be good especially running slide divers or spoons up high - for a pure king salmon presentation though go with wire. There's a reason so many people run wire on divers when it comes to kings.

My guess is if the kicker isn't running at half throttle you probably are getting somewhere between 6 and 8 amps - you have a lot of things running to keep up with that. How many batteries are you drawing from? YOu could increase your battery size or go with a couple of batteries to help with overall capacity - this will delay the time it takes to discharge to the levels you are seeing which might be enought to get through a trip - three things to consider: Rate at which you discharge Rate at which you charge overall capacity of your batteries If you aren't fishing in high sun you can reduce the overall display brightness - that can get you 1/2 amp less drain on a bigger display - turn gain down on your fishhawk can help a little too - I had a 9.9 Yamaha High Thrust and I think it had an 8amp alternator on it if I recall. I know this doesn't answer the original question but....

Fill the gap at the bottom of the treble where the three shanks come together to form the main stem of the hook - 90% of the time when a king breaks you off (guys will say they got bit off) the leader will be flattened out as it was wedged up in that gap and ultimately broke off. You can fill that gap with JB-Weld, 5 minute epoxy, or a number of other things and it will keep that from happening. Also smart to do it on your tournament tie flies as well. A few manufacturers also make hooks with the gap already filled - Addya and Salmon Candy offer these hooks with pre-filled gaps. https://www.allseasonssports.com/addya-hercules-2x-treble-no-bite-off-no-cut-off-bl.html

You absolutely should get a survey. Brian Garrett - Tall Tails here on LOU can provide you with an accredited survey - when purchasing a boat a survey oftentimes is a good bargaining chip if issues are found - you'll know eyes wide open going into the deal what is in front of you.

Belongs to Gust Freeman - You could probably call the Wright's Landing booth and ask for contact information for GF Charters.

Don't be afraid of speed either - not every day but some days its key - what Whaler says above is a good range but some days they like it fast - 3.0 or even 3.2.

Happy to see life jackets on the kids! "Will we whack this one?"

It really isn't hard to spool it up yourself - main thing is you just have to keep a ton of tension between wire and the reel as you are spooling it on - no different than spooling up a mono reel just need more tension applied to the wire as you spool it.

Ignore surface speed that the fishhawk provides - too many variables that can contribute to that not being good data to incorporate into your decision making process. Surface temp, down speed, and down temp that the FishHawk provides are all valuable. Use GPS speed and tie that to your heading to get an understanding of how things are unfolding at the surface.

If you look at it that way then nothing to lose really....probably worth it then if its priced like that and roll the dice on the motor.....