Jump to content

rolmops

Professional
  • Posts

    4,283
  • Joined

  • Last visited

Everything posted by rolmops

  1. Could it be that this new development had something to do with scrapping many current wind energy projects? http://www.triplepundit.com/2011/09/wind-lens/ Not only does this system have the potential of producing up to three times as much energy as the conventional wind mills, it also can be build on floating bases. This would make it possible to have windmills on Lake Ontario at 15 or 20 miles off shore. Maybe this new development is on the horizon (maybe behind the horizon) for Lake Ontario. If it is,it may be a source for jobs and energy without the nasty side effects. Heck,you would have to go to the 500 foot line to be able to see them.
  2. What Glen says usually works. I have had some problems with the connections and the check valves on the fuel lines.The problem was that air would come into the system from one engine connection and it would cause the other engine to run very rough or stall. that is why I prefer a system with shut off valves so that there does not have to be a constant open connection between the 2 engines. Another possibility is a 2 or 3 way valve with a shut off valve that only allows one connection at a time to be open. Cornelis.
  3. Ha, I was looking down on you while tasting many different kinds of wine in several wineries. It was great weather and a beautiful to be out on the lake.
  4. That setup is fine,remember you are not trying to break any speed records so there is little need for precision. You will definitely not have any cavitation problems with that kicker.
  5. I have tried three different types over the past 2 years. Double cedar wooden boards These don't fold but if left unpainted they absorb water fast and they lay deep in the water thereby increasing the effectiveness. If you use wooden ones do not paint them because that will seal the wood and they will be higher up in the water. You can make them yourself or buy them of e-bay for $40 to $60. Riviera triple boards. Because of the way the riviera is designed you can use them on whatever side of the boat you want.The others are exclusively right or left. They are a bit too light and too high in the water for my taste. If you add a good amount of lead to the rear end and the middle of the outer board they become very hard pulling boards. Again, the trick is to get them to lay deep in the water so they have maximum contact with water which makes them pull harder. A set is $180 plus shipping Otter boats They lay very deep in the water and track very good,probably the best of the three that I tried. I have yet to see an otter board flip over in high waves.The 2 other types will do that and it is a terrible mess to deal with. In turns the otter boats perform best. a set is about $200. Overall in my experience the otter boat is the best. I tried to answer your other post,but there seems to be a hitch in the system,anyway, that setup is fine. Cornelis.
  6. Mortigan, All you have to do is fly there from Toronto. American citizens visiting Cuba never get a stamp in their passports,lol technically you have never left Canada.
  7. Ok, here is a report. This afternoon,my 5 almost completely tame suburban deer came up to me as I was pulling out the tomato and pole bean plants from the vegetable garden. I threw the greens across the fence and some of it was hanging on the fence they happily munched on the greens about 2 feet away from where I stood and one of the fawns came up and sniffed my hand. It was a nice experience in my Brighton, NY backyard.
  8. That sure sounds like Stellwagen Bank. Did you catch those stripers in federal waters or in MA waters?
  9. I received my extra reels and 2 Penn 330 GTI reels and 1 Penn 320 GTI will be transferred to leadcore.The 330s will easily hold 10 colors and the 320 will be fine with 8 colors. I was thinking about taking the 10 color lines and splicing in a few feet of 30 pound mono at 6 and 8 colors so they can be easily used at different lengths when running them of the boards.Did any of you good people ever try this and if so ,how did it work out? Thanks,Cornelis.
  10. There really is no such thing as a cold blooded beast in outboard engines. Usually there are a few problems that combine together and create the sort of trouble that you describe. It is never a bad thing to clean or change your plugs,specially when you troll a lot running a very low rpm. A slightly hotter plug may be called for in that case. A smoking engine is not usually because of a mixture that is too rich,but if you suspect your fuel mix,just mix a bottle with 1:50 and start it with that. If it does not smoke then you have too much oil. Improbable ,but possible. One thing you should check is your fuel enrichener. Maybe it is stuck in open position after you push the key in and only releases after a few minutes when the engine warms up.Another thing may be the air supply to the intakes. Some dirt in the air holes in your hood may cause this sort of trouble. How about the spark? Are all the plugs firing or is there a bad coil? How about the link and sync? The best thing is to check the trouble shooting page in your manual and do all the checks.That way you go by trial and elimination. Always do the cheap things first. The even better thing to do is to buy a manufacturers manual for your engine.The 1990s manuals are very user friendly.The Chiltons and Selocs are nice but useless and most of the E_Bay CDs are Selocs. Cornelis.
  11. The best thing to do is to go back to the one inch plywood and fiberglass it in again. You should use marine grade plywood which is very dense and you should seal it with epoxy resin and hardener. Once it is properly sealed and dry you can glass it in. The reason why your stringers rotted away is that the wood was not properly sealed before it was glassed in and when the fiberglass started cracking,the wood got wet and it expanded thereby damaging the fiberglass even more and enough for the wood to start rotting. This was a very common thing to happen in Bayliners (bilge liners)build in the early 90s,but it is the first time I heard of it in a Thompson. Was there any flotation foam in the boat? If there was,was it dry or waterlogged? When you have the floor out and the stringers replaced it would be a good time to check the flotation foam and replace it. You can either pour it in, which is best, or use the pink closed cell boards that you can buy at Lowes. Cornelis.
  12. I would like to join an amateur team next year mostly for fishing the pro-ams. Is there anybody looking for a team member? Cornelis.
  13. Mine is usually winterized after thanks giving. My Brother In Law comes over for Thanks Giving so, dependent on the weather, we either go perch and pike fishing in I-Bay or brown trout fishing in the lake. The worst part is having winterized and then pulling the boat out again because of very good weather in early to mid December. Fall trolling is a matter of finding the best temperature.That is where the bait can be found. It is much like Spring with the fish in a frenzy to get the last few good meals before the long cold and hungry winter.
  14. Thank you all for your opinions and expertise. Being mostly a weekend warrior I decided to buy an additional 2 57 daiwa accudepth reels and a Penn 320gti. The accudepths will replace 2 Penn 330Gti reels at the trolling rods and the 330s will hold the 10 color core while the 320 will hold the 8 color core. This is a great improvement over the shakespeare tidewater 30 L reels that I bought for $8 a piece when a lot of K-Marts closed down.
  15. It is a good thing that this tax payers money robbing scheme has been exposed and disposed of. On another note,by making this go away,we have not in any way advanced our very real need for alternative non polluting energy sources. This means that we still have the same problems that haunt us,while countries like Germany and China are making giant strides toward environmentally clean and renewable energy,we are staying stuck with the same old same old. Germany has already 20% clean renewable energy and it has a roaring economy. Having stopped this is one thing,now we have to think about tomorrow.
  16. I think that the Canadian government has done about a hundred times as good as the private companies. Not a single salmon has come back to spawn in the commercial fishing pens of the private companies
  17. According to my my son's girl friend, the problem that has to be tackled is mostly the smolting time that the atlantics need. They spawn very high up in the watershed and then the small ones will stay in the rivers for 2 to 6 years before they return to the lake. That is very different from the king salmon.Most of the stocking experience is with the kings and the cohos and in the beginning the atlantics were treated just like the kings and cohos.That did not work. Her Masters project is mostly concerned with an effort to find or create a current genetic strain that carries very similar if not identical DNA from the strains that lived in the lake 150 years ago. At the same time there are watershed restoration projects in Ontario to the north and west of Kingston and in the future reaching into Algonquin park and the Ottawa river. It will probably take a few decades,but it is happening.
  18. My soon to be daughter in law is working on a Masters degree at Queens university in Kingston on Atlantic salmon in Lake Ontario. She tells me that the Canadians have been very successful with the Atlantic stocking over the past few years. There is no reason why our side cannot be successful.
  19. Fishing Report Your Name / Boat Name:Rolmops ============== TRIP OVERVIEW ============== Date(s):9-25-11 Time on Water:06.00-13.00 Weather/Temp:66 Wind Speed/Direction:north east Waves: 1 to 2 Surface Temp: 64 Location:the ledge LAT/LONG (GPS Cords): =============== FISHING RESULTS =============== Total Hits: 17 Total Boated:9 Species Breakdown:steelhead/king Hot Lure: spindoctors with flies,glow froggy with froggy dodger, luhr Jensen 00 yellow dodger and dream weaver ss orange crush. Trolling Speed: 2.4-3.6 Down Speed: 2.2-2.9 Boat Depth: 370-550 Lure Depth: between 45 and 65 ==================== SUMMARY & FURTHER DETAILS Left the Genny around six and had to maneuver between all the combat fishing boats (20) just to get out. Headed due north and on the way north I saw what I am pretty sure is Longline (who else takes pictures with a flash light at 6.30?).Along the way I slowed down a couple of times to see what the screen looked like and at 380 it was looking promising So I lowered the dipsy's and trolled farther out ,bur no dice.Picked it up again and went all the way out to 550 to find an empty screen.Started trolling back and as the trolling direction turned south,the bite started. Pretty much on everything I put out,all the way back to 370 fow. Got a few real nice hits,that came to the surface and started dancing on the water. Got a very nice 2 year old salmon and the rest steelies. Thanks to Reeljerks for the deep water advice. Cornelis. ====================
  20. It was nice to see you out there with the now legal three rods at the back of your boat and the camera flashing. It was just before sunrise and my boat was probably the first one to pass by yours on the way to 500 fow away from the combat fishing zone. Cornelis.
  21. Sometimes when a deer gets hit by a car it will get internal injuries that get infected.The result is a bag of pus that often is quite big.It will sit there until it ruptures and drains or gets reabsorbed.
  22. I was just at Gander Mountain in Henrietta and they are selling 2 packs (2x300 feet) Mason 27 pound test leadcore for $14.95. This is usually somewhere close to $30. Somebody must have put the wrong stickers on the package. This is your chance to get something for cheap. Cornelis.
  23. I think about replacing my leadcore reels and currently under consideration are the Penn levelwind reels like the 209,the 309 and the 320. But I don't know whether the 209 will hold 10 colors of 27 pound test.Does any of you good people have some expertise to share? Thank you for your opinions and advice. Cornelis.
  24. I always thought that Irondequoit Creek only has brown trout, steel head and some rainbow stocking,but never any salmon. Why would any salmon come to Irondequoit creek?
×
×
  • Create New...