CK3080

Added a tower, some rod holders, lights, and some new cisco planer reels and pulleys. Ditched the old bimini and planer masts/rod holders. Shook her down last week, she'll be splashing in Wilson in a week.

$100? I dont know what these things are worth. Make a reasonable offer and its yours. I added a tower to the boat and this is just taking up room in the garage.

I'm going to be listing a pair of 4' great lakes planer plus masts/trees for sale as soon as I get my boat out of storage this week. They are used, but not abused. Selling for $500 for the pair. Bottom rod holder is pinned and horizontal to fishing as a dipsey rod holder. Top of tree can also be used as a rod holder, so you can fish three board lines and a diver off one set up, plus your big boards. Come with track mounts. Not sure where you are located, i'm in Pittsburgh PA, but fish Erie PA often and will be in Olcott/Wilson the third week of May. Pictured on my boat in action below.

Bimini and stainless frame from wellcraft 220 sportsman. Good shape, had some stitching reinforced two years ago. No boot. Includes stainless mounting hardware. Located in Pittsburgh PA but I’m in Erie PA often. Will be in Olcott/Wilson fishing the bar the third week of May. Willing to meet within a reasonable distance. Sent from my iPhone using Lake Ontario United mobile app

everyone runs things a little different. as long as cross currents arent too bad, and i'm running my gear greater than 40' feet or so, I always run: Inside 9' rod, wire, mag dipsey (deeper diver 124 mm), 1 setting Outside 10.5' rod, wire, regular dipsey (deeper diver 107 mm), 2.5 setting approximate ratios of 2:1 on inside and 3:1 on outside. far from an exact science, but it gets close, and then we repeat what works. watch your turns carefully, especially in cross currents. We dont tangle often, but I've had some nasty ones.

Great looking boat. I was looking very hard for one of these a few years ago before I found my Wellcraft, one of the easiest dual console boats to put a kicker on as well if wanted in the future. Looks like its priced very fairly as well. Good luck with the sale!

We do as well. Have run spoons/ flashers / paddles with meat interchangeably on the the same side. i like to deploy inside rod very slow to make sure its diving. outside rod gets deployed faster, letting it get some room behind the back of the boat and stay higher in the water column before it starts to dive down and out.

I tip my rods the other way, but same idea setup as others above. 1 9' rod, 1 10'6" rod, mag dipsey inside on 1, regular dipsey outside on 2.5.

By inlines, do you mean inline weights or inline planers? What you have depicted there are what most call big boards (regular planer boards). Inline boards are small plastic contraptions and are attached to individual rod lines, not the planer line. What you have depicted there will work for sure, but getting reset will be an issue. I normally fish three lines similarly off big boards, but say Rod 1 gets hit, it releases and you reel in the fish. You are now at a risk of a major tangle if you re-deploy that rod at the same depth/set back as you previously got hit on in the inside position without pulling in the other two rods first. Not an issue to reset all the lines, just making sure you know the situation. If i deployed that setup and rod 2 got hit, I'd probably pull in rod 3 and reset it as the same set back and depth as rod 2, then send them both back out. Doing the same for Rod 1 eventually. If you know what setback and depth is working best, set all the rods the same and keep hauling in fish. I too fish Erie (Lampe Marina) and once you know where the eyes are and what they want, its all production with big boards.

I know this topic is almost a year old, but how has the top held up? Anything you wish you would have ordered different? Getting very close to pulling the trigger on one of these myself, and have a very similar boat (Wellcraft 220 Sportsman).

Great rig! Sorry to see it go, Dev. To any potential buyers, this boat is rigged to the gills. Having fished on it several times and being an engineer myself, I can attest that no detail or expense was spared. Does surprisingly well in the rough stuff too.

x2 on Wellcraft. I would look hard at any 232 Coastal's that may be on the market. I wanted a dual console, and went with the Wellcraft 220 Sportsman, and dont think I could get a better trailerable big water boat for what I wanted. I too have an F200 and a T9.9 kicker. Does everything I need it to and more, just no cuddy. I currently tow with a toyota tundra (5.7L, 4.30 rear end), and not sure I would want to put much more boat behind it. Wellcrafts run heavy.

Bought my current boat in Atlantic City New Jersey on Halloween 2015. Putted around the marina, wrote a check, put her on the trailer and drove her home. Price was right though and I knew there were likely going to be issues with the early 2000s yamaha four stroke (which finally reared their ugly head this year). If the price is right and you are prepared for possible costly repairs, send it! Sent from my iPhone using Lake Ontario United

We boated a pile of kings last may off the bar with bayrats xld’s on 5color stealthcore. Deployed it on a whim and it was on fire. Will be running it again this year. And the sticks held up great. Sent from my iPhone using Lake Ontario United

Great deal for someone starting out on Lake O! I have more convectors now than I know what to do with, but man I wish I wouldve ran across a deal like this 5 or 6 years ago. Sent from my iPhone using Lake Ontario United