Jump to content

L&M

Moderators
  • Posts

    2,784
  • Joined

  • Last visited

Everything posted by L&M

  1. Pair of vice grips fit the bill nicely in a pinch
  2. Save your 80 bucks and do as was mentioned above. Pull the carb & put a kit in it, fuel pump works off crankcase pulse & just turning it over by hand will not make it pump fuel, nor is it a test to see if its ok, engine has to be running for it to operate.
  3. Raised it, leveled it out & widened it this spring.
  4. North state launch at the end of W. Port Bay Rd.
  5. L&M

    Erie 6/17/18

  6. Joe has the right idea, they weren't originally designed for use with rubber bands to start with . If your going to use rubber bands with them you might as well just use shower curtain rings and be done with it.
  7. I would side with Fishnut. If it was drained/winterized properly or at least drained I would spend the least amount of money on parts & fresh fuel to get it running as possible and see what you have to work with. That 2.5L thats in it now is one of the best engines around for reliability & I wouldn't be afraid of the Cobra drive either if all is well with it .
  8. Wouldn't be this one by chance would it ?
  9. 3.0L 140hp
  10. Really no need if all is clean & the o-rings are replaced. Besides the next guy takes it off won't be curse-in ya when it all needs to be cleaned off.
  11. Shift yoke up on a Cobra drive is forward gear
  12. https://www.lakeontariounited.com/fishing-hunting/topic/72318-wilson-harbor-invitational/?do=findComment&comment=538321
  13. L&M

    Lower end

    Rock the drive from side to side and look in the gap between the top of the gimbal ring & the transom plate, you will probably see your issue right there where the gimbal ring clamps on to the steering pin. It's a rather common problem, but not an inexpensive one to fix.
  14. They restrict the amount of water that flows out thru the risers/elbows at idle/low rpms & helps keep a steady flow going thu the engine when the sea water pump isn't pumping to capacity due to the lower rpm's .
  15. 9.9 ELH = 9.9hp Electric start, Longshaft (20"), Tiller handle steering
  16. Good talking yesterday Jack, let me know how you make out.
  17. L&M

    Oneida 5-5-18

    Sheeps head
  18. Bob Spencer 585-259-9527 https://marinesurveyrochester.com/
  19. L&M

    for sale : usa Ad Closeout

    As Todd made mention to above, until the problem is resolved in the app it only takes a few seconds to open LOU in your phn browser & make your changes there
  20. Docks were put in at the North Launch this morning May 1
  21. Good choice
  22. L&M

    autopilot

    Your pump will work with the ev or most any other system you might want to switch too.
  23. Chris Drogi @ Anchor Resort & Marine 315-947-5331
  24. There not in yet
×
×
  • Create New...